Smeg Induction Hob Error ER27

⚡ Quick Answer: The Smeg Induction Hob error ER27 indicates a malfunction in the induction coil, often accompanied by unusual buzzing sounds. This may suggest an issu... ✅ DIY Fixable

What Does Error ER27 Mean?

The Smeg Induction Hob error ER27 indicates a malfunction in the induction coil, often accompanied by unusual buzzing sounds. This may suggest an issue with the hob's internal components that requires attention. To address this error, reset the hob by turning it off at the mains for 5-10 minutes. Ensure the surface is clean and free from cookware or debris before restarting. If the error persists, further diagnostics may be necessary.

Possible Causes

  • Induction Coil

How to Fix Error ER27

DIY Fix Check for general error context and reset

  1. Turn off the induction hob completely using the mains switch.
  2. Wait at least 5–10 minutes to allow internal systems to reset and cool.
  3. Ensure there is no cookware on the hob surface and clean any debris, spills, or obstructions from the hob surface.
  4. Turn the hob back on and check if the error reappears.

Technician Only Contact Smeg Technical Support for ER27 diagnostic

  1. Record the exact model number of the hob and the appearance context for ER27 (startup, during heating, after cook cycle, etc.).
  2. Contact Smeg certified service with the error code and model information.
  3. Have the technician check internal sensor readings, control board communication, and error log memory if available.
🛑 When to Call a Pro:
  • If ER27 persists after reset and basic checks.
  • If there are signs of overheating, burning smell, or unusual noises.
  • If the hob becomes unresponsive or unsafe to use.

Technical Specifications

wattage 3000W
component Induction Coil
resistance 10-30 ohms
part_number SMEG-INDCOIL-001
voltage_rating 230V AC

Common Questions

What does ER27 error mean on Smeg Induction Hob?

ER27 indicates a malfunction in the induction coil, often with buzzing sounds.

Can I fix Smeg Induction Hob ER27 error myself?

Yes, try resetting the hob by turning it off for 5-10 minutes and cleaning the surface.

How much does it cost to fix ER27 error?

The cost depends on diagnostics and parts, with a technician visit likely required.

When should I call a technician for ER27?

Call if the error persists after resetting, or if there are signs of overheating or unusual noises.

Sources & References

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!