Smeg Induction Hob Error ER24

⚡ Quick Answer: The Smeg Induction Hob error code ER24 signifies a malfunction in the induction coil, often indicated by flickering display lights and unusual buzzing... ✅ DIY Fixable

What Does Error ER24 Mean?

The Smeg Induction Hob error code ER24 signifies a malfunction in the induction coil, often indicated by flickering display lights and unusual buzzing sounds. If you encounter this error, it may be a sign of an internal issue that needs addressing. A basic reset may resolve the problem temporarily, but if the error persists, further investigation is necessary.

Possible Causes

  • Induction Coil

How to Fix Error ER24

DIY Fix Confirm code and basic reset

  1. Turn off the induction hob at the mains power.
  2. Wait 5–10 minutes.
  3. Turn the hob back on and check if the code reappears.

Technician Only Contact Smeg Technical Support

  1. Provide the exact model number of the induction hob.
  2. Report that ER24 code appears on the display.
  3. Have a technician review internal diagnostics and service manual.
🛑 When to Call a Pro:
  • If ER24 persists after power reset
  • If the hob becomes unresponsive, overheats, or shows multiple error codes

Next step

Choose the next step for ER24

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Induction Heating Coil

Generates electromagnetic energy to heat pots and pans directly.

Typical part-only price
$80 - $180
DIY difficulty
Medium
Estimated time
30-60 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 2000W
component Induction Coil
resistance 10-30 ohms
part_number SMEG-IC12345
voltage_rating 230V AC

Common Questions

What does ER24 error mean on Smeg Induction Hob?

ER24 indicates a malfunction in the induction coil, often with flickering lights and buzzing sounds.

Can I fix Smeg Induction Hob ER24 error myself?

Yes, try a basic reset: turn off the hob, wait 5-10 minutes, then power it back on.

How much does it cost to fix ER24 error?

Repair costs vary by model and region; contact a technician for an estimate.

When should I call a technician for ER24?

Call a technician if ER24 persists after a reset, or if the hob is unresponsive or overheats.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!