Smeg Induction Hob Error ER19

⚡ Quick Answer: The Smeg Induction Hob error code ER19 indicates a potential malfunction in the induction coil, often accompanied by unusual buzzing sounds and an unr... ⚠️ Difficulty Varies

What Does Error ER19 Mean?

The Smeg Induction Hob error code ER19 indicates a potential malfunction in the induction coil, often accompanied by unusual buzzing sounds and an unresponsive display. If you encounter this error, it's essential to check the user manual for specific guidance and observe the circumstances under which the error occurs, such as during startup or cooking.

Possible Causes

  • Induction Coil

How to Fix Error ER19

DIY Fix Check user manual and appliance display

  1. Refer to the specific model’s official user manual for any listing of the ER19 code
  2. Check the induction hob display for any additional symbols or text accompanying ER19
  3. Note the operating context (startup, cooking, idle) when ER19 appears

DIY Fix Contact Smeg Support

  1. Contact Smeg official support with your model number and ER19 code
  2. Provide details of when the code appears and any recent events (power surge, spills, etc.)
  3. Follow the instructions provided by official support

Technician Only Official diagnostics and repair

  1. Review official technical documentation or factory service manual specific to the model showing ER19
  2. Diagnose using manufacturer-defined fault code list if available
  3. Check control board communication, sensors, and power supply if indicated by updated documentation
🛑 When to Call a Pro:
  • If the ER19 code persists after power cycling and checking cookware, stop using the appliance and contact Smeg service

Next step

Choose the next step for ER19

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Induction Heating Coil

Generates electromagnetic energy to heat pots and pans directly.

Typical part-only price
$80 - $180
DIY difficulty
Medium
Estimated time
30-60 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 3000W
component Induction Coil
resistance 1-5 ohms
part_number Smeg 123456789
voltage_rating 230V AC

Common Questions

What does ER19 error mean on Smeg Induction Hob?

ER19 indicates a malfunction in the induction coil, often with buzzing sounds and an unresponsive display.

Can I fix Smeg Induction Hob ER19 error myself?

You can check the user manual and appliance display, but contacting Smeg support is recommended for further assistance.

How much does it cost to fix ER19 error?

Repair costs for the ER19 error vary based on the model and region.

When should I call a technician for ER19?

Call a technician if the ER19 error persists after power cycling and checking cookware.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!