Smeg Induction Hob Error ER14
⚡ Quick Answer: The SMEG induction hob error code ER14 indicates a potential malfunction in the induction coil, which may be accompanied by buzzing sounds and an unre... ✅ DIY Fixable
What Does Error ER14 Mean?
The SMEG induction hob error code ER14 indicates a potential malfunction in the induction coil, which may be accompanied by buzzing sounds and an unresponsive display. To address this issue, ensure the cooking surface is clean and free of any objects. Power cycling the hob by turning it off at the circuit breaker and waiting a few minutes can also help reset the system.
Possible Causes
- Induction coil
- Control board
- Wiring issues
How to Fix Error ER14
DIY Fix Check basic conditions and power cycle
- Turn off the induction hob at the circuit breaker or main switch.
- Wait a few minutes to allow any residual heat to dissipate.
- Ensure the cooking surface is clean and there are no pans or objects on the hob.
- Restore power and see if the code returns.
Technician Only Contact SMEG Technical Support for diagnosis
- Record the exact error code and the conditions under which it appeared.
- Contact SMEG customer service or a certified service technician with model details.
- Have a technician inspect internal connections, control boards, and sensors as appropriate.
- If the error code persists after basic user‑level power cycling and cleaning attempts.
- If the hob exhibits additional malfunction symptoms (no heating, unresponsive controls, unusual noises).
Next step
Choose the next step for ER14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Induction Heating Coil
Generates electromagnetic energy to heat pots and pans directly.
- Typical part-only price
- $80 - $180
- DIY difficulty
- Medium
- Estimated time
- 30-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Induction Hob parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does ER14 error mean on SMEG induction hob?
ER14 indicates a potential malfunction in the induction coil, often causing buzzing sounds and an unresponsive display.
Can I fix SMEG induction hob ER14 error myself?
Yes, try power cycling the hob and ensuring the cooking surface is clean.
How much does it cost to fix ER14 error?
Repair costs vary by model and region; contact a technician for an estimate.
When should I call a technician for ER14?
Call a technician if the error persists after troubleshooting or if other malfunctions occur.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!