Smeg Induction Hob Error ER13

⚡ Quick Answer: The SMEG induction hob error code ER13 indicates a malfunction in the temperature sensor, which may lead to erratic display behavior and intermittent ... ✅ DIY Fixable

What Does Error ER13 Mean?

The SMEG induction hob error code ER13 indicates a malfunction in the temperature sensor, which may lead to erratic display behavior and intermittent heating issues. This error can occur due to faulty internal components such as the control board, wiring harness, or EEPROM. Performing a general reset by turning off the hob at the mains for several minutes may help clear the error.

Possible Causes

  • Temperature Sensor

How to Fix Error ER13

DIY Fix General reset & checks

  1. Turn off the induction hob at the mains supply.
  2. Wait for several minutes and then restore power to see if the code clears.
  3. Ensure there is no cookware or objects on the control panel that could trigger false signals.

Technician Only Diagnostic inspection

  1. Inspect internal control board and EEPROM memory integrity if accessible.
  2. Check wiring harnesses and connections for signs of damage or poor contacts.
  3. Refer to specific technical service manual for your hob model to interpret ER13 if available.

Parts needed: Control board / PCB, Internal wiring harness, EEPROM or memory components

🛑 When to Call a Pro:
  • If the ER13 persists after a reset and basic checks.
  • If the hob becomes unresponsive or shows other fault codes.
  • If there are signs of electrical faults (smoke, burning smell, sparks).

Technical Specifications

wattage 3500W
component Temperature Sensor
resistance 10-30 ohms
part_number SMEG123456
voltage_rating 230V AC

Common Questions

What does ER13 error mean on SMEG induction hob?

ER13 indicates a malfunction in the temperature sensor, causing erratic display and heating issues.

Can I fix SMEG induction hob ER13 error myself?

Yes, try resetting the hob by turning it off at the mains for a few minutes. Ensure no objects are on the control panel.

How much does it cost to fix ER13 error?

Repair costs vary based on technician and parts needed; a professional diagnostic is likely required.

When should I call a technician for ER13?

Contact a technician if ER13 persists post-reset, the hob is unresponsive, or if you notice electrical faults.

Sources & References

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!