Smeg Induction Hob Error ER07

What Does Error ER07 Mean?

The Smeg induction hob error code ER07 typically indicates a malfunction in the heating element, which may prevent the hob from heating properly or result in flickering lights. If this error persists, it is advisable to perform basic troubleshooting steps to resolve the issue.

Possible Causes

• Heating Element

How to Fix Error ER07

DIY Fix Document the error and check basic conditions

1. Write down the exact error code (ER07) as shown on the hob display.
2. Turn the hob off and unplug it (or switch off at the breaker) for at least 5 minutes.
3. Ensure the hob surface is clean, dry, and no cookware is unintentionally activating controls.
4. Reconnect power and see if the error reappears.

Technician Only Contact Smeg Technical Support for model‑specific diagnosis

1. Provide the exact model number and ER07 code to Smeg support.
2. Ask for official documentation or technical interpretation of ER07 for that specific induction hob model.
3. Follow any instructions provided by Smeg support for diagnostics or repair.

🛑 When to Call a Pro:

• If ER07 persists after power cycling and basic checks — contact qualified SMEG service.

Technical Specifications

wattage	2000W
component	Heating Element
resistance	10-30 ohms
part_number	SMG-HEAT-12345
voltage_rating	230V AC

Common Questions

What does ER07 error mean on smeg induction hob?

ER07 indicates a heating element malfunction, affecting proper heating and causing flickering lights.

Can I fix smeg induction hob ER07 error myself?

Yes, you can try basic troubleshooting like power cycling and ensuring the surface is clean and dry.

How much does it cost to fix ER07 error?

Repair costs vary by model and region; contact a technician for specific estimates.

When should I call a technician for ER07?

Call a technician if the ER07 error continues after performing power cycling and checks.

Sources & References

• Induction errors list (Smeg UK support) (official)

Data last verified: 2026-03-09