Smeg Induction Hob Error ER00

⚡ Quick Answer: The Smeg induction hob error code ER00 typically signals a malfunction in the induction coil, often indicated by a flashing display and a buzzing soun... ✅ DIY Fixable

What Does Error ER00 Mean?

The Smeg induction hob error code ER00 typically signals a malfunction in the induction coil, often indicated by a flashing display and a buzzing sound. This error may arise due to interference from cookware over sensors or control areas. For resolution, it is advisable to power off the unit, wait a few minutes, and ensure no obstructions are present. If the issue persists, consulting the user manual specific to your model or contacting technical support is recommended.

Possible Causes

  • Induction coil

How to Fix Error ER00

DIY Fix General troubleshooting and verification

  1. Turn off the induction hob at the mains and wait a few minutes.
  2. Ensure that there is no cookware or object sitting over sensors or the control area.
  3. Check the user manual specific to your Smeg model for any mention of ER00 (if available).
  4. If the code persists after power cycling, prepare to contact Smeg support with details (model and when code appears).
🛑 When to Call a Pro:
  • If the ER00 code persists after power cycling and basic checks, contact Smeg technical support or a certified appliance technician for diagnosis.

Technical Specifications

wattage 2000W
component Induction Coil
resistance 1-5 ohms
part_number SMG-IC-12345
voltage_rating 230V AC

Common Questions

What does ER00 error mean on smeg induction hob?

The ER00 error indicates a malfunction in the induction coil, often with a flashing display and buzzing sound.

Can I fix smeg induction hob ER00 error myself?

Yes, you can try power cycling the unit and ensuring no cookware is obstructing sensors.

How much does it cost to fix ER00 error?

Repair costs can vary by model and region; consult local technicians for estimates.

When should I call a technician for ER00?

If the ER00 code remains after basic troubleshooting, contact Smeg support or a certified technician.

Sources & References

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!