Smeg Dishwasher Error E6
⚡ Quick Answer: The E6 error code on your Smeg dishwasher indicates a drainage issue, typically caused by a blocked or kinked drain hose or a malfunctioning drain pum... ✅ DIY Fixable
What Does Error E6 Mean?
The E6 error code on your Smeg dishwasher indicates a drainage issue, typically caused by a blocked or kinked drain hose or a malfunctioning drain pump. Symptoms include water remaining in the dishwasher at the end of the cycle, unusual sounds during operation, and the appliance stopping mid-cycle due to an inability to drain water properly. Addressing this issue promptly is essential to ensure optimal performance.
Common Symptoms:
- Water remains in the dishwasher at end of cycle
- Dishwasher stops mid‑cycle due to inability to drain
- Error code displayed shortly after a wash when water should be expelled
Possible Causes
- Blocked or kinked drain hose preventing proper water evacuation (medium)
- Drain pump obstruction or failure (medium)
How to Fix Error E6
DIY Fix Check external drainage path and filter
- Turn off and unplug the dishwasher.
- Inspect the drain hose under the sink and at the dishwasher connection for kinks or obstructions.
- Remove and clean the dishwasher’s internal filters and check for debris blocking water flow.
- Restart the dishwasher to see if the error clears.
Technician Only Inspect and service drain pump and internal drainage components
- Disconnect power and water supply to the dishwasher.
- Remove the kickplate/cover and access the drain pump.
- Check for internal obstructions, damaged impeller, or seized pump.
- Test pump motor operation and continuity; replace pump if faulty.
- Verify hose connections and replace any damaged hoses.
Parts needed: drain pump assembly, drain hose, filters
- If after cleaning filters and hoses the error persists
- If water still fails to drain and you cannot access or safely test the pump
Next step
Choose the next step for E6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 30-50 ohms |
| part_number | Smeg 1102000001 |
| voltage_rating | 230V AC |
Common Questions
What does E6 error mean on smeg dishwasher?
E6 indicates a drainage fault; water isn't draining properly, causing operational interruptions.
Can I fix smeg dishwasher E6 error myself?
Yes, check the drain hose for kinks and clean the internal filters to resolve the issue.
How much does it cost to fix E6 error?
Repair costs for the E6 error range from $80 to $250, depending on parts and labor.
When should I call a technician for E6?
Call a technician if the error persists after cleaning or if you cannot access the pump safely.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!