Smeg Dishwasher Error E05

⚡ Quick Answer: The Smeg Dishwasher E05 error indicates a water fill or inlet issue, preventing the dishwasher from filling with water during the wash cycle. This may... ✅ DIY Fixable

What Does Error E05 Mean?

The Smeg Dishwasher E05 error indicates a water fill or inlet issue, preventing the dishwasher from filling with water during the wash cycle. This may occur due to a malfunctioning water inlet valve, a blocked inlet filter, or insufficient water supply. Users may notice the E05 code during the filling phase, and the cycle will not progress past this step.

Common Symptoms:

  • Dishwasher does not fill with water at start of wash
  • E05 displayed during fill phase
  • Cycle does not proceed past filling step

Possible Causes

  • Water inlet valve / solenoid fault (medium)
  • Blocked or kinked water supply / inlet filter (medium)
  • Water supply turned off or insufficient (medium)

How to Fix Error E05

DIY Fix Check water supply and inlet hose

  1. Ensure the household water supply tap feeding the dishwasher is fully open
  2. Inspect the inlet hose for kinks, bends, or visible damage
  3. If possible, disconnect and reconnect the hose to ensure a secure connection

DIY Fix Clean inlet filters

  1. Turn off water supply and power to the dishwasher
  2. Locate the small mesh filter at the inlet hose connection and inside the inlet valve assembly
  3. Remove and rinse the filters to clear any debris
  4. Reassemble and test dishwasher fill

Technician Only Test and replace water inlet valve

  1. Verify water inlet valve operation with a multimeter for electrical continuity
  2. Inspect solenoid and valve components for failure
  3. Replace inlet valve if defective

Parts needed: Water inlet valve / solenoid assembly

🛑 When to Call a Pro:
  • If water supply and inlet filters are clear but E05 persists
  • If multimeter testing shows inlet valve solenoid is defective
  • If there are signs of leaks or electrical faults around inlet components

Technical Specifications

wattage 100W
component Drain Pump
resistance 10-30 ohms
part_number SMEGA12345
voltage_rating 230V AC

Common Questions

What does E05 error mean on Smeg Dishwasher?

E05 indicates a water fill issue, preventing the dishwasher from filling during the wash cycle.

Can I fix Smeg Dishwasher E05 error myself?

Yes, check the water supply, inspect the inlet hose, and clean the inlet filters.

How much does it cost to fix E05 error?

Repair costs range from ¥8,000 to ¥25,000, depending on parts and labor.

When should I call a technician for E05?

Call a technician if the error persists after checking filters and supply, or if the inlet valve is defective.

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!