Smeg Dishwasher Error E06

⚡ Quick Answer: The Smeg Dishwasher error E06 indicates a drainage fault, typically resulting in water not draining properly. Symptoms include the dishwasher stopping... ✅ DIY Fixable

What Does Error E06 Mean?

The Smeg Dishwasher error E06 indicates a drainage fault, typically resulting in water not draining properly. Symptoms include the dishwasher stopping mid-cycle, water remaining inside after a cycle, and the pump running without effectively draining. Common causes include blockages in the drain hose or filter, as well as a faulty drain pump. To resolve the issue, inspect and clear any obstructions in the drainage path.

Common Symptoms:

  • Dishwasher stops mid‑cycle and displays E06/E6
  • Water remains in the dishwasher after a cycle
  • Pump runs but water does not exit or drains slowly

Possible Causes

  • Drain hose blockage or kink (medium)
  • Filter or drain pump obstruction/clog (medium)
  • Faulty drain pump (medium)

How to Fix Error E06

DIY Fix Check and clear drainage path

  1. Turn off and unplug the dishwasher.
  2. Inspect the drain hose for kinks, bends, or visible blockages.
  3. Remove any build‑up or debris in the hose.
  4. Check the filter at the base of the dishwasher and clean it thoroughly.
  5. Run a short rinse cycle to see if the error clears.

Technician Only Inspect/Replace drain pump

  1. Disconnect power and water supply.
  2. Remove dishwasher access panels to reach the drain pump.
  3. Inspect the pump impeller for obstruction or damage.
  4. Test the pump with a multimeter for continuity.
  5. Replace the pump if faulty.

Parts needed: Drain pump, Hose clamps, Drain hose (if damaged)

🛑 When to Call a Pro:
  • If water remains and you cannot safely access the pump or hoses.
  • If there’s evidence of leaks when moving the appliance.
  • If the error persists after clearing filters, hoses, and draining manually.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number SME-123456
voltage_rating 230V AC

Common Questions

What does E06 error mean on Smeg Dishwasher?

E06 indicates a drainage fault, causing the dishwasher to stop and water to remain inside.

Can I fix Smeg Dishwasher E06 error myself?

Yes, you can check for blockages in the drain hose and filter as DIY actions.

How much does it cost to fix E06 error?

Estimated repair costs range from $80 to $250, depending on parts and labor.

When should I call a technician for E06?

Call a technician if you cannot access the pump or if the error persists after DIY attempts.

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!