Smeg Dishwasher Error E14

⚡ Quick Answer: The Smeg Dishwasher E14 error code indicates a malfunction related to the water inlet valve, specifically a flow meter or water intake measurement fau... ✅ DIY Fixable

What Does Error E14 Mean?

The Smeg Dishwasher E14 error code indicates a malfunction related to the water inlet valve, specifically a flow meter or water intake measurement fault. This may result in irregular filling behavior, such as insufficient or excessive water filling. Common causes include a faulty or blocked flow meter and loose or damaged wiring connections. Addressing this issue promptly can prevent further complications during operation.

Common Symptoms:

  • Dishwasher displays E14 during or after fill phase
  • Machine may fill irregularly (too little or too much water)

Possible Causes

  • Faulty or blocked flow meter (water intake measurement sensor) (medium)
  • Loose or damaged wiring/connector to flow meter (medium)

How to Fix Error E14

DIY Fix Basic checks before deeper diagnostics

  1. Ensure the water supply tap is fully open and the inlet hose is connected correctly.
  2. Turn off and unplug the dishwasher for a few minutes, then restart to see if the code clears.
  3. Check that the inlet hose filter isn’t clogged with debris.

Technician Only Inspect and service flow meter assembly

  1. Disconnect power and water supply to the dishwasher.
  2. Access the inlet assembly and locate the flow meter module (often with a small turbine).
  3. Inspect the turbine for obstruction and ensure it rotates freely; clean if needed.
  4. Check wiring and connectors for corrosion or damage; secure or replace as necessary.
  5. Replace the flow meter if defective and reassemble.
  6. Run a test cycle to ensure proper water fill and that E14 no longer appears.

Parts needed: Flow meter assembly, Connectors/wiring harness

🛑 When to Call a Pro:
  • If symptoms persist after all basic checks and flow meter inspection.
  • If you are uncomfortable accessing internal components or detecting wiring issues.
  • If there is evidence of water leakage or electrical faults during diagnostics.

Technical Specifications

wattage 15W
component Water Inlet Valve
resistance 500-1500 ohms
part_number Smeg 610320032
voltage_rating 230V AC

Common Questions

What does E14 error mean on Smeg Dishwasher?

E14 indicates a malfunction in the water inlet valve, leading to irregular filling behavior.

Can I fix Smeg Dishwasher E14 error myself?

Yes, check the water supply, inlet hose connections, and filter for clogs to troubleshoot.

How much does it cost to fix E14 error?

Repair costs vary based on parts and labor, generally falling within the €€ range.

When should I call a technician for E14?

Call a technician if the error persists after basic checks or if you suspect wiring issues.

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!