Smeg Dishwasher Error E12
⚡ Quick Answer: The Smeg Dishwasher E12 error indicates a malfunction in the drying fan or condenser system. Users may notice the E12 error code displayed on the cont... ⚠️ Difficulty Varies
What Does Error E12 Mean?
The Smeg Dishwasher E12 error indicates a malfunction in the drying fan or condenser system. Users may notice the E12 error code displayed on the control panel along with poor drying performance and unusual fan noises. This issue could stem from a faulty drying fan motor, blocked air ducts, or electrical faults within the control board. Addressing this error promptly is essential for optimal dishwasher performance.
Common Symptoms:
- Error E12 displayed on control panel
- Drying cycle performance issues on models with active drying
- Possible fan noise or lack of drying
Possible Causes
- Drying fan motor failure (medium)
- Blocked air duct or condenser (medium)
- Faulty control board fan triac or wiring fault to fan (low)
How to Fix Error E12
DIY Fix Basic checks before service call
- Turn off and unplug dishwasher
- If model has active drying, listen for abnormal fan noise
- Check user manual to confirm if model supports active drying and if E12 is listed
Technician Only Inspect and repair drying system
- Disconnect mains power and remove appropriate panels
- Inspect and test drying fan motor and impeller for free movement and continuity
- Clean or clear any blockage in ducts or condenser system
- Test wiring and replace faulty fan triac or control components as needed
Parts needed: Drying fan motor, Fan triac or control board, Air ducts / condenser components
- If you are not confident safely accessing internal parts
- If cleaning and basic checks do not clear E12
Next step
Choose the next step for E12
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Smeg 610210100 |
| voltage_rating | 230V AC |
Common Questions
What does E12 error mean on Smeg Dishwasher?
E12 indicates a drying system fault, typically related to the drying fan or condenser, affecting drying performance.
Can I fix Smeg Dishwasher E12 error myself?
Yes, you can check for abnormal fan noise and consult the user manual for model specifics, but ensure safety first.
How much does it cost to fix E12 error?
The estimated repair cost for the E12 error ranges from $100 to $350, depending on the necessary parts.
When should I call a technician for E12?
Call a technician if you're unsure about accessing internal parts or if basic checks don't resolve the E12 error.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!