Simpson Refrigerator Error E06
⚡ Quick Answer: The E06 error code on Simpson Refrigerators typically indicates a malfunction related to the evaporator fan. This issue may lead to unusual noises and... ✅ DIY Fixable
What Does Error E06 Mean?
The E06 error code on Simpson Refrigerators typically indicates a malfunction related to the evaporator fan. This issue may lead to unusual noises and reduced cooling efficiency, affecting the overall performance of your refrigerator. If you encounter this error, it is essential to address it promptly to prevent further complications.
Common Symptoms:
- Error code E06 displayed on control panel
- Possible failure to cool or normal operation depending on model
Possible Causes
- Evaporator Fan Motor
- Obstruction in Fan Blades
- Faulty Control Board
How to Fix Error E06
DIY Fix Basic Power Reset
- Unplug the refrigerator from the power outlet.
- Wait for 5–10 minutes to allow the control board to reset.
- Plug the refrigerator back in and observe if E06 reappears.
Technician Only Inspect Control and Sensors
- If the error persists after a reset, a technician should inspect the refrigerator’s control board, wiring harnesses, and temperature sensors/thermistors for faults.
- Use diagnostic tools to check continuity and signal integrity between sensors and the main control.
- Replace any defective sensors or repair wiring harnesses as needed.
Parts needed: Control board, Temperature sensors/thermistors, Wiring harnesses
- If basic user-level resets do not clear the error.
- If there are signs of electrical wiring damage, burning smell, or cooling failure.
- If you are not comfortable performing any internal inspections.
Next step
Choose the next step for E06
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 25W |
|---|---|
| component | Evaporator Fan Motor |
| resistance | 10-30 ohms |
| part_number | Simpson 123456789 |
| voltage_rating | 120V AC |
Common Questions
What does E06 error mean on Simpson Refrigerator?
E06 indicates a potential issue with the evaporator fan, leading to unusual noises and cooling problems.
Can I fix Simpson Refrigerator E06 error myself?
Yes, you can try a basic power reset by unplugging the refrigerator for 5-10 minutes.
How much does it cost to fix E06 error?
Repair costs vary based on local technician fees and parts needed; check with local services for estimates.
When should I call a technician for E06?
Call a technician if the error persists after a reset or if you notice signs of electrical damage or cooling failure.
Sources & References
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!