Simpson Refrigerator Error E01

⚡ Quick Answer: The Simpson refrigerator E01 error indicates a potential issue with the cooling system, often associated with compressor failure or internal sensor fa... ⚠️ Difficulty Varies

What Does Error E01 Mean?

The Simpson refrigerator E01 error indicates a potential issue with the cooling system, often associated with compressor failure or internal sensor faults. Common symptoms include the E01 code displayed on the control panel and a noticeable interruption in the cooling function, often accompanied by unusual humming sounds. Immediate checks should include ensuring doors are closed and seals are intact, as well as a power reset to see if the error clears.

Common Symptoms:

  • E01 displayed on control panel
  • Possible interruption of normal cooling function

Possible Causes

  • Compressor Relay
  • Start Capacitor
  • Compressor Motor

How to Fix Error E01

DIY Fix Basic checks and power reset

  1. Unplug the refrigerator from the power outlet.
  2. Wait 5–10 minutes.
  3. Plug the refrigerator back in and observe whether the E01 code clears.

DIY Fix Inspect for obvious issues

  1. Check that the refrigerator doors are fully closed and door seals are intact.
  2. Listen for unusual noises that might suggest a component failure.

Technician Only Professional diagnosis of sensors and wiring

  1. Consult Simpson or Electrolux/parent‑brand technical support for model‑specific error code definitions.
  2. Perform diagnostic checks on temperature sensors (thermistors) and associated wiring.
  3. Use service tools to access any hidden diagnostic modes or error logs, if available.

Parts needed: Thermistor/temperature sensor, Sensor harness/wiring

🛑 When to Call a Pro:
  • Error persists after resetting and basic checks
  • Signs of electrical burning, smoke, or unusual sounds
  • Temperature inside the refrigerator cannot be maintained

Next step

Choose the next step for E01

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 150W
component Compressor
resistance 5-15 ohms
part_number SRF-COMP-1234
voltage_rating 220V AC

Common Questions

What does E01 error mean on Simpson refrigerator?

The E01 error indicates possible compressor failure or sensor issues affecting cooling.

Can I fix Simpson refrigerator E01 error myself?

Yes, try unplugging for 5-10 minutes and check doors and seals.

How much does it cost to fix E01 error?

Repair costs vary depending on parts and labor needed for diagnosis.

When should I call a technician for E01?

Call if the error persists after a reset or if you notice unusual sounds or smells.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!