Sharp Air Conditioner Error F8
⚡ Quick Answer: The Sharp Air Conditioner F8 error signifies a communication failure between the indoor and outdoor units, causing the unit to stop normal operation a... ✅ DIY Fixable
What Does Error F8 Mean?
The Sharp Air Conditioner F8 error signifies a communication failure between the indoor and outdoor units, causing the unit to stop normal operation and enter a protective state. This error can arise from an overload control activation or a possible issue with the temperature sensor or wiring. Symptoms include the F8 code displayed on the remote or unit, blinking lamps, and potentially abnormal temperature readings.
Common Symptoms:
- Error F8 displayed on remote or unit, possibly with blinking lamps.
- Unit stops normal operation and enters protective state.
- May coincide with abnormal temperature readings or poor performance.
Possible Causes
- Protective overload control activation (medium)
- Temperature sensor or wiring issue (low)
How to Fix Error F8
DIY Fix Basic checks and reset
- Turn off the air conditioner and unplug it from power.
- Wait at least 1 minute and then restore power.
- Ensure air filters are clean and not clogged.
- Check that nothing obstructs airflow at indoor and outdoor units.
Technician Only Diagnostic and sensor/board inspection
- Use service tools to read detailed error logs if available.
- Check temperature sensors (indoor/outdoor) and their harness connections.
- Measure continuity of wiring related to temperature inputs and control circuits.
- Inspect control board for signs of stress or protective trips.
Parts needed: Temperature sensors, Wiring harnesses, Control board
- Error F8 persists after basic reset and filter/airflow checks.
- Unit stops mid‑cycle repeatedly with F8 displayed.
- Unusual noise or component overheating accompanies the error.
Next step
Choose the next step for F8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
HVAC Control Board
Controls fan, compressor, sensor, and communication functions in the HVAC unit.
Model-compatible Air Conditioner parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Air Conditioner Fin Cleaner
For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.
Model-Compatible Washable AC Filter
A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Control Board |
| resistance | 5-15 ohms |
| part_number | SHARP 1D001A |
| voltage_rating | 220V AC |
Common Questions
What does F8 error mean on Sharp Air Conditioner?
F8 error indicates a communication failure between the indoor and outdoor units, leading to the unit stopping normal operation.
Can I fix Sharp Air Conditioner F8 error myself?
Yes, start by turning off the AC, unplugging it, waiting a minute, and checking the air filters for clogs.
How much does it cost to fix F8 error?
Repair costs for the F8 error range from ¥10,000 to ¥50,000+, depending on parts and labor.
When should I call a technician for F8?
Call a technician if the F8 error persists after a reset, or if the unit repeatedly stops mid-cycle with the error displayed.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!