Sharp Air Conditioner Error E3

⚡ Quick Answer: The Sharp Air Conditioner E3 error signals a malfunction with the indoor temperature sensor or related internal fan components. This can lead to errat... ✅ DIY Fixable

What Does Error E3 Mean?

The Sharp Air Conditioner E3 error signals a malfunction with the indoor temperature sensor or related internal fan components. This can lead to erratic temperature readings and inadequate cooling performance. When the E3 error appears, the air conditioner may stop functioning properly, and the indoor fan may either cease operation or behave unpredictably. A power reset might temporarily resolve the issue, but persistent occurrences indicate the need for further inspection.

Common Symptoms:

  • Air conditioner stops functioning normally when E3 appears (commonly reported with AC error codes indicating a fault)
  • Indoor fan may stop or exhibit erratic behavior (reported in general AC E3 contexts)
  • Unit may fail to start or shut down upon detecting the code

Possible Causes

  • Indoor Temperature Sensor

How to Fix Error E3

DIY Fix Basic checks & reset

  1. Turn off the air conditioner and disconnect power at the breaker or main plug.
  2. Wait at least 10 minutes to allow the unit to fully reset.
  3. Reconnect power and attempt to restart the unit.
  4. Check for obvious obstructions around the indoor and outdoor fan units.

Technician Only Inspect internal components related to sensors and fans

  1. Check integrity and connections of the indoor fan motor and its wiring harness.
  2. Inspect temperature sensors/thermistors for damage or poor connections.
  3. Evaluate communication wiring between indoor and outdoor units if applicable.
  4. Perform diagnostic tests with service tools to isolate fault.

Parts needed: Indoor fan motor, Temperature sensors / thermistors, Wiring harness / connectors

🛑 When to Call a Pro:
  • Repeated E3 occurrences after power reset
  • Unit fails to operate normally after basic checks
  • Strange noises, burning smells, or visible damage around wiring

Next step

Choose the next step for E3

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

$15 - $35 · Easy · 15-30 mins

Check fit & price
Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Air Conditioner parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Air Conditioner Fin Cleaner

For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.

View maintenance supply
Maintenance supply

Model-Compatible Washable AC Filter

A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Indoor Temperature Sensor
resistance 5-10 kOhms
part_number SHARP 2D-1000-01
voltage_rating AC 220V

Common Questions

What does E3 error mean on Sharp Air Conditioner?

E3 error indicates a problem with the indoor temperature sensor or fan, leading to cooling issues.

Can I fix Sharp Air Conditioner E3 error myself?

Yes, you can try resetting the unit by turning it off and disconnecting power for 10 minutes.

How much does it cost to fix E3 error?

Repair costs for the E3 error can range from ¥5,000 to ¥25,000, depending on the parts and labor required.

When should I call a technician for E3?

Call a technician if the E3 error persists after a reset or if you notice strange noises or burning smells.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!