Samsung Washing Machine Error SE

⚡ Quick Answer: SE means Samsung Washing Machine error SE indicates a malfunction in the motor speed sensor, often accompanied by unusual sounds ... This is typically a DIY fix.

What Does Error SE Mean?

Samsung Washing Machine error SE indicates a malfunction in the motor speed sensor, often accompanied by unusual sounds or failure to spin.

Common Causes

  • Motor Speed Sensor (60% likelihood)
  • Wiring Issues (30% likelihood)
  • Control Board Failure (10% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Motor Speed Sensor

    Locate the motor speed sensor, typically near the motor assembly. Check for visible damage or disconnections in the wiring harness.

    Ensure the connections are secure.

  2. Step 2: Test the Sensor with a Multimeter

    Disconnect the sensor and use a multimeter to test its resistance. It should typically read between 200-1000 ohms. If it reads outside this range, replace the sensor.

    Refer to the service manual for specific resistance values.

  3. Step 3: Check Wiring for Damage

    Inspect the wiring leading to the motor speed sensor for any signs of wear, fraying, or disconnections. Repair or replace any damaged wires.

    Use wire strippers for clean connections.

  4. Step 4: Examine the Control Board

    If the sensor and wiring are intact, check the control board for any burnt components or signs of damage. If necessary, replace the control board.

    This step may require professional assistance.

How to Reset

To reset the SE error, unplug the washing machine for 5 minutes, then plug it back in and restart the cycle.

Technical Specifications

wattage N/A
component Motor Speed Sensor
resistance 200-1000 ohms
part_number DC31-00054A
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the SE error myself?

Yes, if you have basic tools and experience with appliance repairs, you can troubleshoot the SE error.

How much does it cost to replace the motor speed sensor?

The cost of a replacement motor speed sensor typically ranges from $30 to $100, depending on the model.

What causes the SE error in Samsung washing machines?

The SE error is primarily caused by a malfunction in the motor speed sensor or issues with its wiring.

Should I call a professional for the SE error?

If you are uncomfortable with electrical components or if the control board is damaged, it's best to call a professional.

When should I consider replacing my washing machine due to the SE error?

If the repair costs exceed half the price of a new machine or if multiple errors occur frequently, consider replacement.

User Comments (0)

Share your experience or solution below.

Be the first to comment!