Samsung Washing Machine Error 1E
⚡ Quick Answer: The Samsung Washing Machine 1E error indicates a malfunction in the water level sensor or pressure switch, preventing accurate water level detection. ... ⚠️ Difficulty Varies
What Does Error 1E Mean?
The Samsung Washing Machine 1E error indicates a malfunction in the water level sensor or pressure switch, preventing accurate water level detection. This issue often results in the machine failing to fill with water or stopping mid-cycle due to incorrect water level readings. Users may notice the error code appearing immediately at the start of a cycle or during the filling process.
Common Symptoms:
- Error appears immediately at start or during cycle when trying to fill with water.
- Washer fails to fill or fill properly.
- Washer may stop mid-cycle due to water level misdetection.
Possible Causes
- Faulty water level sensor / pressure switch (medium)
- Disconnected, bent, clogged or damaged pressure hose/tube (medium)
- Loose, oxidized, or damaged wiring/connectors between sensor and control board (medium)
How to Fix Error 1E
DIY Fix Basic check and reset
- Unplug the washing machine for a few minutes to allow the electronics to reset.
- Check that water supply valves are fully open and hoses are not kinked.
Technician Only Inspect and repair water level sensing system
- Disconnect power and water supply.
- Access and inspect the pressure hose for bends, blockages, or disconnections.
- Check the water level sensor (pressure switch) using appropriate testing tools (multimeter).
- Inspect and repair or replace damaged wiring/connectors between the sensor and control board.
- Replace the pressure switch if confirmed defective.
Parts needed: Pressure switch / water level sensor, Pressure hose/tube, Wire harness/connectors
- If the error code reappears after basic checks and resetting.
- If you do not feel comfortable working inside the washer.
- If the water level sensor replacement and wiring checks do not resolve the error.
Next step
Choose the next step for 1E
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Water Level Sensor |
| resistance | 1-5 ohms |
| part_number | DC96-00887A |
| voltage_rating | 120V AC |
Common Questions
What does 1E error mean on Samsung Washing Machine?
The 1E error means there's a malfunction in the water level sensor, affecting water filling and detection.
Can I fix Samsung Washing Machine 1E error myself?
Yes, you can perform basic checks like resetting the machine and ensuring water supply valves are open.
How much does it cost to fix 1E error?
Repair costs can range from $20 to $100 for parts, while technician labor varies by region.
When should I call a technician for 1E?
Call a technician if the error persists after basic checks or if you're uncomfortable working inside the washer.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!