Samsung Washing Machine Error PF
⚡ Quick Answer: The Samsung Washing Machine PF error indicates a power failure that occurs during a wash or rinse cycle, causing the machine to stop unexpectedly. Thi... ✅ DIY Fixable
What Does Error PF Mean?
The Samsung Washing Machine PF error indicates a power failure that occurs during a wash or rinse cycle, causing the machine to stop unexpectedly. This issue is typically due to a momentary power outage or an unstable electrical connection. When the PF code appears, the display may flash, signaling that the washing process has been interrupted.
Common Symptoms:
- Machine stops mid‑cycle and displays PF
- Occurs during wash or rinse operations
Possible Causes
- Momentary power outage or interruption to supply (high)
- Tripped breaker or unstable electrical connection (medium)
How to Fix Error PF
DIY Fix Check and stabilize power
- Ensure mains power is present and stable at the outlet
- Check your home’s breaker panel for tripped circuits and reset if necessary
- Verify the washer’s power cord is fully seated and not loose
DIY Fix Restart washer cycle
- Turn off the washing machine
- Wait a few minutes after power has returned
- Select a new cycle to resume washing
Technician Only Inspect for unstable voltage or internal connection issues
- Test incoming voltage to ensure it is within acceptable range
- Inspect wiring harnesses and connectors inside the machine for signs of looseness or wear
- Check internal power supply components for faults
Parts needed: Multimeter, Internal wiring harness, Power supply board (if needed)
- The PF error persists after stabilizing power and restarting the machine
- There are signs of electrical damage such as burning smell or sparks
- Frequent voltage fluctuations trigger repeated PF errors
Next step
Choose the next step for PF
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Power Control Board
Distributes and switches electrical power for the appliance's major loads.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 500W |
|---|---|
| component | Control Board |
| resistance | 10-30 ohms |
| part_number | DC92-00281A |
| voltage_rating | 120V AC |
Common Questions
What does PF error mean on Samsung Washing Machine?
PF error means there was a power failure during a wash or rinse cycle, causing the machine to stop.
Can I fix Samsung Washing Machine PF error myself?
Yes, check power stability, ensure the cord is secure, and restart the machine after a power interruption.
How much does it cost to fix PF error?
Repair costs for the PF error range from ¥5,000 to ¥25,000, depending on parts and labor.
When should I call a technician for PF?
Call a technician if the PF error persists after troubleshooting or if you notice signs of electrical damage.
Sources & References
- Samsung Support PF Error Description (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!