Samsung Washing Machine Error OC
⚡ Quick Answer: The Samsung Washing Machine OC error code indicates an overload or overflow condition. This error typically occurs when the washer detects excessive l... ✅ DIY Fixable
What Does Error OC Mean?
The Samsung Washing Machine OC error code indicates an overload or overflow condition. This error typically occurs when the washer detects excessive load or an imbalance in the drum, often leading to unusual sounds during operation. The machine may stop mid-cycle, especially during the spin or rinse phases, and water levels may appear higher than expected, causing the washer to struggle to spin.
Common Symptoms:
- Washer stops mid‑cycle and displays OC
- Error appears during spin or rinse phases
- Water level seems higher than expected / machine struggles to spin
Possible Causes
- Excessive load (overload) in drum (medium)
- Unbalanced load causing sensor trigger (medium)
- Possible water overflow or high water level misinterpreted (medium)
How to Fix Error OC
DIY Fix Basic OC Troubleshooting
- Stop the cycle and open washer door (if safe)
- Remove some laundry to reduce load weight
- Redistribute remaining laundry evenly in drum
- Restart a shorter or spin cycle only
Technician Only Inspect Drain, Water Sensors, and Load Detection Systems
- Check that drain hose and filter are not blocked or kinked
- Verify proper operation of water level sensor/pressure switch
- Inspect load imbalance sensors and motor control for faults
- Test water inlet valve and associated circuitry if overflow suspected
Parts needed: Drain hose, Water level sensor / pressure switch, Load imbalance sensor / motor control, Water inlet valve
- Error persists despite load reduction and basic troubleshooting
- Signs of water leakage during cycles
- Unusual noises or vibrations suggesting mechanical fault
Next step
Choose the next step for OC
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
- Typical part-only price
- $15 - $30
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does OC error mean on Samsung Washing Machine?
The OC error indicates an overload or overflow condition, causing the washer to stop mid-cycle.
Can I fix Samsung Washing Machine OC error myself?
Yes, you can reduce the load and redistribute laundry to troubleshoot the error.
How much does it cost to fix OC error?
Repair costs range from $80 to $300, depending on the part that needs replacement.
When should I call a technician for OC?
Call a technician if the error persists after troubleshooting or if you notice water leakage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!