Samsung Washing Machine Error LE
⚡ Quick Answer: The Samsung Washing Machine error LE indicates a motor lock protection issue, often linked to water drainage problems or sensor anomalies. This error ... ✅ DIY Fixable
What Does Error LE Mean?
The Samsung Washing Machine error LE indicates a motor lock protection issue, often linked to water drainage problems or sensor anomalies. This error may cause the washer to stop mid-cycle and could be accompanied by a humming sound. Common causes include detected water leakage, a clogged drainage system, or incorrect water level readings from sensors. Proper troubleshooting can help identify and resolve the issue.
Common Symptoms:
- Error LE displayed on control panel
- Washer stops mid‑cycle
- Possible visible leakage or unexpected water in/out flow
Possible Causes
- Water leakage detected by internal sensors (high)
- Drainage system issue (clogged or improperly installed drain hose) (medium)
- Pressure/level sensor anomaly or incorrect water level reading (medium)
How to Fix Error LE
DIY Fix Check for water leaks and proper drainage setup
- Unplug the washer from power.
- Inspect the area under and around the washer for any water.
- Verify that drain hose is connected correctly and not kinked, and is placed at proper height per manufacturer guidelines.
- Ensure hoses (inlet and drain) are firmly connected and not damaged.
DIY Fix Inspect and clear drain hose and pump filter
- Access the drain pump filter (refer to user manual location).
- Place a towel or shallow pan to catch water.
- Unscrew filter cover and remove debris, lint, or obstructions.
- Reconnect filter and run a short rinse cycle to test.
Technician Only Test and possibly replace pressure sensor or internal components
- Use diagnostic mode to read error logs.
- Inspect pressure switch, level sensor hose, and wiring for faults or corrosion.
- Test the drain pump operation and continuity.
- Replace defective parts.
- Re‑test operation.
Parts needed: Pressure/level sensor assembly, Drain pump, Hoses and connectors
- If visible water leak persists after hose checks
- If repeated error occurs despite proper drain setup
- If internal sensor or electrical issues suspected
Next step
Choose the next step for LE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 500W |
|---|---|
| component | Motor Drive Unit |
| resistance | 5-15 ohms |
| part_number | DC97-16924A |
| voltage_rating | 120V AC |
Common Questions
What does LE error mean on Samsung Washing Machine?
LE error indicates a motor lock protection issue related to water drainage or sensor anomalies.
Can I fix Samsung Washing Machine LE error myself?
Yes, you can check for water leaks, inspect the drain hose, and clear the drain pump filter.
How much does it cost to fix LE error?
Estimated repair costs range from ¥8,000 to ¥30,000+, depending on parts and labor.
When should I call a technician for LE?
Call a technician if there are persistent leaks after checking hoses or if the error recurs despite proper setup.
Sources & References
- Samsung Support: LE/LC error indicating leakage (official)
- All‑Errors: Samsung Washing Machine LE Error Code (community)
- LearnProTips: Decoding LE on Samsung Washer (community)
- RepairCity.in: LE Error in Samsung Washing Machine (community)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!