Samsung Washing Machine Error HC

⚡ Quick Answer: HC means Samsung Washing Machine error HC indicates a heating circuit malfunction, often accompanied by unusual sounds during ope... This is typically a DIY fix.

What Does Error HC Mean?

Samsung Washing Machine error HC indicates a heating circuit malfunction, often accompanied by unusual sounds during operation or failure to heat water.

Common Causes

  • Heating Element (50% likelihood)
  • Thermistor (30% likelihood)
  • Control Board (20% likelihood)

Troubleshooting Steps

  1. Step 1: Check the Heating Element

    Use a multimeter to test the heating element for continuity. If there is no continuity, replace the heating element.

    Ensure the heating element is completely dry before testing.

  2. Step 2: Inspect the Thermistor

    Locate the thermistor and test its resistance with a multimeter. Compare the reading to the specifications in the manual; replace if out of range.

    Thermistors can fail due to temperature fluctuations.

  3. Step 3: Examine the Control Board

    Check for any visible damage or burnt components on the control board. If damaged, consider replacing the control board.

    Look for any loose connections that may affect operation.

  4. Step 4: Test Wiring Connections

    Inspect all wiring leading to the heating element and thermistor for signs of wear or damage. Repair or replace as necessary.

    Corroded or frayed wires can lead to intermittent issues.

  5. Step 5: Run a Diagnostic Test

    After repairs, run a diagnostic test cycle to ensure the error code does not reappear and that the machine heats correctly.

    Refer to the user manual for the specific diagnostic procedure.

How to Reset

To reset the HC error, unplug the washing machine for 5 minutes, then plug it back in and run a diagnostic cycle.

Technical Specifications

wattage 1500W
component Heating Element
resistance 10-30 ohms
part_number DC47-00019A
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the HC error myself?

Yes, if you have basic electrical knowledge and tools, you can troubleshoot and replace parts.

How long does it take to fix the HC error?

Fixing the HC error typically takes about 45-60 minutes, depending on the issue.

What causes the HC error in Samsung washers?

The HC error is usually caused by a faulty heating element, thermistor, or control board.

Should I replace the heating element or call a professional?

If you're comfortable with electrical repairs, you can replace it yourself; otherwise, consider calling a professional.

What happens if I ignore the HC error?

Ignoring the HC error can lead to prolonged washing cycles and potential damage to the machine.

User Comments (0)

Share your experience or solution below.

Be the first to comment!