Samsung Washing Machine Error E4
⚡ Quick Answer: The Samsung Washing Machine E4 error code indicates a load imbalance detected during operation, often resulting in the wash cycle stopping mid-cycle. ... ✅ DIY Fixable
What Does Error E4 Mean?
The Samsung Washing Machine E4 error code indicates a load imbalance detected during operation, often resulting in the wash cycle stopping mid-cycle. It may also be associated with drainage issues, leading to water accumulation in the drum. To resolve this, redistribute the load evenly and ensure the drainage system is clear.
Common Symptoms:
- Wash cycle stops mid‑cycle
- Error displayed during spin or wash
- Drum stops spinning and may wait before unlocking
Possible Causes
- Load imbalance (clothes distribution) (medium)
- Drainage or water level detection anomaly (low)
How to Fix Error E4
DIY Fix Redistribute laundry to fix imbalance
- Pause washer or open door once unlocked
- Redistribute clothes evenly around drum
- Avoid overloading or underloading
- Restart the wash/spin cycle
DIY Fix Check basic drainage and water pathways
- Ensure drain hose is not kinked or blocked
- Check that water fills normally at start of cycle
- Clean inlet and drain filters if accessible
- Verify washer is level and stable
Technician Only Inspect and service balance/sensor systems
- Check drum bearings and suspension for wear
- Inspect load imbalance sensors and related wiring
- Test drain pump and water level sensors as needed
Parts needed: Balance sensors, Drum suspension/shock absorbers, Drain pump, Water level/pressure sensor
- Error persists after redistributing laundry multiple times
- Loud unusual noises (clunking, scraping) occur
- Water does not drain or fill normally after checks
Next step
Choose the next step for E4
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Washer Shock Absorber
Dampens tub movement and vibration during high-speed spin cycles.
- Typical part-only price
- $25 - $100
- DIY difficulty
- Medium
- Estimated time
- 45-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | DC31-00054D |
| voltage_rating | 120V AC |
Common Questions
What does E4 error mean on Samsung Washing Machine?
E4 error indicates a load imbalance detected during operation, causing the wash cycle to stop.
Can I fix Samsung Washing Machine E4 error myself?
Yes, you can redistribute the laundry evenly and check for any drainage blockages.
How much does it cost to fix E4 error?
The estimated repair cost ranges from $100 to $300, depending on parts and service rates.
When should I call a technician for E4?
Call a technician if the error persists after redistribution, if you hear loud noises, or if water does not drain or fill normally.
Sources & References
- Samsung Washer Error UE/UC/DC/E4 – How To Fix It (community)
- Samsung Washer Ur E4 UE DC Code: Quick Fix Guide (community)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!