Samsung Washing Machine Error E3
⚡ Quick Answer: The Samsung Washing Machine E3 error indicates a drainage issue, often due to an overfilled drum or excessive suds. This error typically causes the wa... ✅ DIY Fixable
What Does Error E3 Mean?
The Samsung Washing Machine E3 error indicates a drainage issue, often due to an overfilled drum or excessive suds. This error typically causes the washing cycle to stop unexpectedly, with the machine attempting to drain water but failing to spin after filling. Unusual sounds may also accompany the error, pointing to a possible foam buildup or water level anomaly that needs addressing.
Common Symptoms:
- Washing cycle stops unexpectedly with E3 displayed
- Washer attempts to drain water
- Excessive suds present in drum
- No spin after water has been filled
Possible Causes
- Excessive water level in drum due to overfill or foam buildup (high)
How to Fix Error E3
DIY Fix Check and correct water and suds conditions
- Pause the cycle and safely power off the machine.
- Check that detergent quantity and type are appropriate.
- If excessive suds are present, run a rinse cycle with no detergent to clear them.
- Ensure the drain hose is securely and correctly positioned according to installation instructions.
Technician Only Inspect drain path and pressure sensors
- Verify drain hose routing and connection to ensure proper gravity drainage.
- Check and clean pump filter and drain pump for blockages.
- Test the pressure switch and related tubing for correct operation and replace if faulty.
Parts needed: Drain hose, Pump filter, Pressure switch
- If E3 persists after addressing water level and drainage issues
- If water leaks, unusual noises, or electrical smells accompany the error
- If internal sensor faults are suspected
Next step
Choose the next step for E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
- Typical part-only price
- $15 - $30
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | DC31-00054D |
| voltage_rating | 120V AC |
Common Questions
What does E3 error mean on Samsung Washing Machine?
The E3 error indicates a drainage issue caused by overfilled water or excessive suds, stopping the wash cycle.
Can I fix Samsung Washing Machine E3 error myself?
Yes, you can pause the cycle, check detergent amounts, and run a rinse cycle to clear excessive suds.
How much does it cost to fix E3 error?
The estimated repair cost for the E3 error is between USD 50–200, depending on parts and labor.
When should I call a technician for E3?
Call a technician if the E3 error persists after addressing the issues, or if you notice leaks or unusual noises.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!