Samsung Washing Machine Error E1

⚡ Quick Answer: E1 means Samsung Washing Machine error E1 indicates a problem with the water level sensor, often resulting in the machine failing... This is typically a DIY fix.

What Does Error E1 Mean?

Samsung Washing Machine error E1 indicates a problem with the water level sensor, often resulting in the machine failing to fill with water or stopping mid-cycle.

Common Causes

  • Faulty water level sensor (50% likelihood)
  • Clogged pressure hose (30% likelihood)
  • Wiring issues (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the water level sensor

    Locate the water level sensor, usually found near the top of the tub. Check for any visible damage or disconnections.

    Ensure the machine is empty before inspection.

  2. Step 2: Check the pressure hose

    Follow the pressure hose from the water level sensor to the tub. Remove it and inspect for blockages or kinks.

    Clear any debris found inside the hose.

  3. Step 3: Test the sensor with a multimeter

    Disconnect the sensor and use a multimeter to check for continuity. If there is no continuity, the sensor may need replacement.

    Refer to the user manual for specific sensor readings.

  4. Step 4: Examine wiring connections

    Inspect the wiring harness connected to the water level sensor for any signs of wear or disconnection. Repair or replace as necessary.

    Ensure connections are secure.

  5. Step 5: Reassemble and test

    After performing the checks and repairs, reassemble the washer and run a test cycle to see if the error persists.

    Keep towels handy in case of leaks.

How to Reset

To reset the E1 error, unplug the washing machine for 1 minute, then plug it back in and run a test cycle.

Technical Specifications

wattage N/A
component Water Level Sensor
resistance 5-15 ohms
part_number DC96-00887A
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the E1 error myself?

Yes, if you have basic tools and follow the troubleshooting steps carefully.

How much does it cost to replace the water level sensor?

Replacement sensors typically range from $20 to $50, plus any labor costs if you hire a technician.

What causes the E1 error to appear?

The E1 error is usually caused by a faulty water level sensor, a clogged pressure hose, or wiring issues.

Should I call a professional for the E1 error?

If you're uncomfortable with electrical components or the issue persists after troubleshooting, it's best to call a professional.

When should I expect the E1 error to clear?

The error will clear after fixing the underlying issue with the water level sensor or related components.

User Comments (0)

Share your experience or solution below.

Be the first to comment!