Samsung Washing Machine Error dS

⚡ Quick Answer: The Samsung Washing Machine error code dS indicates a malfunction in the door lock mechanism, preventing the machine from starting. This typically occ... ✅ DIY Fixable

What Does Error dS Mean?

The Samsung Washing Machine error code dS indicates a malfunction in the door lock mechanism, preventing the machine from starting. This typically occurs when the door is not fully closed, obstructed by laundry, or due to a faulty door latch switch. The error may display at the start or during a wash cycle, even if the door appears closed. To resolve this, ensure the door is securely closed and clear of obstructions, or consider resetting the machine to clear any transient errors.

Common Symptoms:

  • Washer won’t start cycle despite closing door
  • Error displays at the beginning or during cycle
  • Door appears closed but machine still indicates open/locked issue

Possible Causes

  • Door not fully closed or laundry obstructing latch (medium)
  • Faulty door latch switch or door lock assembly (medium)
  • Loose or damaged wiring to door sensor/lock (low)

How to Fix Error dS

DIY Fix Check and re-seat door closure

  1. Ensure all laundry is clear from the door gasket area
  2. Firmly close the door until you hear or feel a secure latch
  3. Restart the wash cycle

DIY Fix Power reset to clear transient errors

  1. Unplug the washing machine from the power outlet
  2. Wait 5–10 minutes to allow internal capacitors to discharge
  3. Plug the washer back in and attempt a cycle again

Technician Only Inspect and replace door lock/sensor assembly

  1. Disconnect the washer from power
  2. Remove front panel to access door lock assembly
  3. Test the door lock switch and sensor for continuity and mechanical engagement
  4. Replace door lock/sensor assembly if defective

Parts needed: Door lock assembly, Door latch switch

Technician Only Check and repair wiring harness to door lock/sensor

  1. Disconnect power and open service panel
  2. Inspect wiring harness and connectors between door lock and main control board
  3. Repair or replace wires/connectors showing wear, corrosion, or breaks

Parts needed: Wire harness, Connectors

🛑 When to Call a Pro:
  • If after basic checks and resets the error persists and you are not comfortable or experienced with appliance repair
  • If the door lock assembly needs replacement and you lack tools or parts

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number DC97-16350A
voltage_rating 120V AC

Common Questions

What does dS error mean on Samsung Washing Machine?

The dS error indicates a door lock malfunction, preventing the machine from starting.

Can I fix Samsung Washing Machine dS error myself?

Yes, check the door closure and perform a power reset to potentially resolve the issue.

How much does it cost to fix dS error?

$50–$150 for parts, plus labor, depending on the needed repairs.

When should I call a technician for dS?

Call a technician if the error persists after basic checks or if you need to replace the door lock assembly.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!