Samsung Washing Machine Error BE

⚡ Quick Answer: The Samsung Washing Machine BE error code indicates a malfunction in the door lock mechanism, which can prevent the machine from starting. This issue ... ✅ DIY Fixable

What Does Error BE Mean?

The Samsung Washing Machine BE error code indicates a malfunction in the door lock mechanism, which can prevent the machine from starting. This issue may also stem from general electronic malfunctions related to the control circuitry or heating system. Symptoms include the washing cycle not starting or stopping unexpectedly, unusual behavior of control panel buttons, and possible failure to heat water in models equipped with heaters.

Common Symptoms:

  • Washing cycle stops or won’t start as expected
  • Error displayed at start or during cycle
  • Machine behaves unusually with control panel buttons
  • Possible failure to heat water (if model has heater)

Possible Causes

  • Electronic control malfunction including heating element circuitry (medium)
  • Faulty or sticking control panel buttons or poor contact (medium)
  • Loose wiring or intermittent contact within control circuitry (medium)

How to Fix Error BE

DIY Fix Reset and basic checks

  1. Unplug the washing machine from the wall outlet.
  2. Wait at least 5–10 minutes to allow capacitive reset of control board.
  3. Plug the machine back in and attempt to run a cycle.
  4. Check that buttons on control panel are not stuck or pressed inadvertently.

Technician Only Inspect control electronics and heating circuit

  1. Disassemble access panels to inspect wiring harness connections to the control board and heating element (if equipped).
  2. Test continuity and proper contact of control panel button switches.
  3. Use appropriate diagnostic tools (multimeter) to check the heating element and associated circuitry.
  4. Replace the control board or heating element if diagnostics indicate component failure.

Parts needed: Control board / main PCB, Heating element (for models with internal heater), Control panel button assembly, Wiring harness and connectors

🛑 When to Call a Pro:
  • If the error persists after reset and basic checks
  • If there are signs of damaged wiring or burnt components
  • If water heating malfunctions are suspected and machine has internal heater

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 500-1500 ohms
part_number DC97-16350A
voltage_rating 120V AC

Common Questions

What does BE error mean on Samsung Washing Machine?

The BE error indicates a malfunction in the door lock mechanism, often preventing the machine from starting.

Can I fix Samsung Washing Machine BE error myself?

Yes, you can perform a reset by unplugging the machine for 5-10 minutes and then plugging it back in.

How much does it cost to fix BE error?

Estimated repair costs range from ¥10,000 to ¥60,000+, depending on parts and service rates.

When should I call a technician for BE?

Call a technician if the error persists after a reset, if there are signs of damaged wiring, or if water heating issues are suspected.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!