Roper Washing Machine Error F1E1
⚡ Quick Answer: The Roper Washing Machine F1E1 error code signifies a control board failure, often linked to an internal EEPROM error or checksum failure. This can le... ✅ DIY Fixable
What Does Error F1E1 Mean?
The Roper Washing Machine F1E1 error code signifies a control board failure, often linked to an internal EEPROM error or checksum failure. This can lead to erratic display behavior and the machine's inability to start or complete wash cycles. Users may also experience repeated beeping when the error occurs, indicating a significant electronic issue rather than a simple mechanical fault.
Common Symptoms:
- Washer displays F1E1 on the control panel
- Unit will not start or complete a wash cycle
- May beep repeatedly when the error appears
Possible Causes
- Control board internal failure or EEPROM checksum error (medium)
- Loose/corroded wiring harness or connector at the control board (medium)
- Power surge or voltage irregularity affecting control electronics (low)
How to Fix Error F1E1
DIY Fix Perform a Power Reset
- Unplug the washer from the electrical outlet.
- Wait at least 5 minutes to allow the control board to fully discharge.
- Plug the washer back in and attempt to start a cycle.
Technician Only Inspect and Repair Control Board and Harnesses
- Disconnect power to the washer.
- Remove access panels to reach the main control board.
- Inspect wiring harnesses and connectors for corrosion, looseness, or damage; reseat connectors.
- If error persists after connection checks and reset, replace the main control board.
- Test the washer after replacement to confirm resolution.
Parts needed: Main control board, Wiring harness/connectors
- If the F1E1 code returns after performing a power reset and basic wiring inspection
- If the user is uncomfortable opening the washer’s cabinet or handling electronic components
Next step
Choose the next step for F1E1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Control Board |
| resistance | N/A |
| part_number | W10620355 |
| voltage_rating | 120V AC |
Common Questions
What does F1E1 error mean on Roper Washing Machine?
F1E1 indicates a control board failure, preventing the washer from starting or completing cycles.
Can I fix Roper Washing Machine F1E1 error myself?
Yes, you can try performing a power reset by unplugging the washer for 5 minutes.
How much does it cost to fix F1E1 error?
Repair costs typically range from $150 to $350 for control board replacement, including parts and labor.
When should I call a technician for F1E1?
Call a technician if the error persists after a power reset or if you are uncomfortable handling electrical components.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!