Roper Dryer Error PF

⚡ Quick Answer: The Roper dryer PF error code indicates a power failure or interruption during operation, causing the dryer to stop mid-cycle or fail to start. This e... ✅ DIY Fixable

What Does Error PF Mean?

The Roper dryer PF error code indicates a power failure or interruption during operation, causing the dryer to stop mid-cycle or fail to start. This error typically appears after a power fluctuation and requires the user to check the power supply and reset the dryer for normal operation.

Common Symptoms:

  • Dryer stops mid‑cycle and displays PF on the control panel.
  • Dryer won’t start or resume until error is cleared.
  • Error typically appears after a power interruption or fluctuation.

Possible Causes

  • Power interruption or unstable supply (medium)

How to Fix Error PF

DIY Fix Check power supply and reset dryer

  1. Ensure the dryer is properly plugged into the outlet.
  2. Check the household circuit breaker panel for a tripped breaker and reset if necessary.
  3. Unplug the dryer for 1–5 minutes then plug it back in to clear error and restart cycle as per general dryer guidance.

Technician Only Inspect electrical connections and wiring

  1. Disconnect power to the dryer.
  2. Inspect the power cord and terminal block for loose, damaged, or burnt connections.
  3. Check internal wiring harness connections to the control board and secure as needed.

Parts needed: Power cord, Terminal block wiring harness, Internal control board connectors

🛑 When to Call a Pro:
  • If the PF code persists after resetting and verifying stable power supply.
  • If there are signs of electrical damage (burn marks, melted wiring, frequent breaker trips).

Technical Specifications

wattage 5000W
component Control Board
resistance 10-30 ohms
part_number W10714516
voltage_rating 240V AC

Common Questions

What does PF error mean on Roper dryer?

PF error indicates a power failure during operation, causing the dryer to stop or not start.

Can I fix Roper dryer PF error myself?

Yes, check the power supply, reset the dryer by unplugging it for 1-5 minutes, and ensure the outlet is functioning.

How much does it cost to fix PF error?

Repair costs range from $50 to $250, primarily for parts and labor from a technician.

When should I call a technician for PF?

Call a technician if the PF code persists after attempts to reset, or if you notice signs of electrical damage.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!