Neff Washing Machine Error E06
⚡ Quick Answer: The Neff Washing Machine E06 error code signifies a malfunction in the door lock mechanism or drainage issues. This can result in the machine stopping... ✅ DIY Fixable
What Does Error E06 Mean?
The Neff Washing Machine E06 error code signifies a malfunction in the door lock mechanism or drainage issues. This can result in the machine stopping mid-cycle, water remaining in the drum, or the door failing to lock or unlock. Common causes include a blockage in the drainage system or a faulty door lock. Addressing the drain pump filter and ensuring the door is securely closed can help resolve the issue.
Common Symptoms:
- Machine stops mid‑cycle and displays E06 "Error 06"
- Water remains in the drum after cycle or machine fails to drain properly
- Door fails to lock or unlock during/after a cycle
- Grinding or humming noise when draining
Possible Causes
- Drainage system blockage or drain pump failure (medium)
- Door lock or door lock detection fault (medium)
How to Fix Error E06
DIY Fix Check/clean drain pump filter and hoses
- Turn off and unplug the washing machine.
- Locate the drain pump filter (usually behind a small hatch at the bottom front).
- Place towels or a shallow tray to catch residual water.
- Slowly open the filter cover and remove debris from the filter.
- Check the drain hose for kinks, bends, or blockages where it connects to the household drain.
DIY Fix Check the door closure and reset power
- Ensure the door is fully closed and latched before starting a cycle.
- Unplug the machine for 5–10 minutes to allow the door lock electronics to reset.
- Plug back in and try a short cycle to see if E06 persists.
Technician Only Inspect and test drain pump and sump hose
- Remove service panel and inspect the drain pump impeller for damage or blockage.
- Test the pump operation and continuity with appropriate tools.
- Inspect sump hose between tub and pump for obstructions or collapse.
Parts needed: Drain pump, Sump hose, Pump filter assembly
Technician Only Evaluate/replace door lock mechanism or sensor
- Diagnose door lock switch and wiring for continuity and proper operation.
- Replace door lock assembly if faulty.
- Verify control board signals to the lock if fault persists.
Parts needed: Door lock assembly, Wiring harness
- If the machine still shows E06 after cleaning filters and hoses.
- If the door remains locked or won’t lock/unlock correctly.
- If you observe unusual noises during drain attempts (suggesting pump damage).
Next step
Choose the next step for E06
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 10-20 ohms |
| part_number | Neff 00167578 |
| voltage_rating | 230V AC |
Common Questions
What does E06 error mean on Neff Washing Machine?
E06 indicates a fault with the door lock mechanism or drainage issues, causing the machine to stop mid-cycle.
Can I fix Neff Washing Machine E06 error myself?
Yes, you can check the drain pump filter and ensure the door is properly closed and latched.
How much does it cost to fix E06 error?
Estimated repair costs range from £80 to £200, including parts and labor.
When should I call a technician for E06?
Call a technician if E06 persists after cleaning, or if the door won't lock/unlock properly.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!