Montpellier Dishwasher Error FE
⚡ Quick Answer: The Montpellier Dishwasher FE error indicates a potential water overflow issue, typically characterized by a continuous beeping sound and flashing dis... ✅ DIY Fixable
What Does Error FE Mean?
The Montpellier Dishwasher FE error indicates a potential water overflow issue, typically characterized by a continuous beeping sound and flashing display lights. This can be a sign of problems such as a malfunctioning float switch or water level sensor, which may lead to excess water in the machine. It is essential to check for visible leaks, ensure the water supply is connected, and inspect for any standing water inside the dishwasher.
Possible Causes
- Faulty water inlet valve
- Clogged drain hose
- Malfunctioning float switch
How to Fix Error FE
DIY Fix Check for water issues and machine documentation
- Turn off and unplug the dishwasher.
- Check that water supply is correctly connected and turned on.
- Inspect for obvious water leaks, water in base, or standing water in tub.
- Refer to your specific dishwasher model manual for error codes (download from Montpellier manuals database).
- Contact Montpellier support with model number and error code if manual doesn’t list 'FE'.
Technician Only Diagnostics by qualified service
- Verify the displayed error code against the specific model’s service manual if available.
- Check water inlet valve and float switch operation since common 'F/E' codes in other makes often relate to fill/flood detection issues (note: **not confirmed** for Montpellier).
- Inspect water level sensors, float assembly, and drainage system for faults.
- Use diagnostic tools to read any internal error logs if available.
Parts needed: Water inlet valve, Float switch, Water level sensor
- If there is visible water leakage under the dishwasher.
- If the dishwasher repeatedly displays 'FE' with no resolution from basic checks.
- If you cannot locate any official code definition in your model’s manual.
Next step
Choose the next step for FE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Water Inlet Valve |
| resistance | 10-20 ohms |
| part_number | MONT-VALVE-1234 |
| voltage_rating | 120V AC |
Common Questions
What does FE error mean on Montpellier Dishwasher?
The FE error indicates a water overflow issue, often with beeping sounds and flashing lights.
Can I fix Montpellier Dishwasher FE error myself?
Yes, check water supply connections, inspect for leaks, and clear any standing water.
How much does it cost to fix FE error?
Repair costs can vary widely, typically ranging from £50 to £200 for parts and labor.
When should I call a technician for FE?
Call a technician if there is visible leakage or if the error persists after basic checks.
Sources & References
- Montpellier Domestic Appliances Support Page (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!