Montpellier Dishwasher Error F6

⚡ Quick Answer: The Montpellier Dishwasher F6 error indicates a malfunction related to the water level sensor, often causing the dishwasher to halt mid-cycle and disp... ✅ DIY Fixable

What Does Error F6 Mean?

The Montpellier Dishwasher F6 error indicates a malfunction related to the water level sensor, often causing the dishwasher to halt mid-cycle and display the F6 code. This issue may prevent proper draining and can be accompanied by unusual sounds during operation. Checking the water supply and restarting the unit can sometimes resolve the issue, but persistent problems may indicate a need for deeper inspection of the water level sensor and associated components.

Common Symptoms:

  • Dishwasher displays F6 on control panel
  • Dishwasher may halt mid‑cycle
  • Potential water fill/level/sensor related issue

Possible Causes

  • Possible water level / sensor error (low)

How to Fix Error F6

DIY Fix Check water supply and restart

  1. Ensure the water supply tap to the dishwasher is fully open
  2. Turn off the dishwasher and disconnect power for a short period (e.g., 5 minutes) then restart
  3. Verify that the dishwasher fills with water normally at cycle start

Technician Only Inspect water level sensor/float and related components

  1. Disconnect power and water supply to the dishwasher
  2. Access the water level sensor/float assembly and inspect for debris, blockage or incorrect positioning
  3. Test the sensor or float switch for continuity with a multimeter
  4. Replace faulty sensor or float hardware if defective

Parts needed: Water level sensor/float assembly, Multimeter for testing

🛑 When to Call a Pro:
  • If the error persists after basic restart and water supply checks
  • If internal components (sensors, float switch) appear damaged or inaccessible

Technical Specifications

wattage 40W
component Drain Pump
resistance 10-20 ohms
part_number MONT-DRN-PMP-001
voltage_rating 230V AC

Common Questions

What does F6 error mean on Montpellier Dishwasher?

The F6 error indicates a water level sensor malfunction, causing the dishwasher to halt mid-cycle.

Can I fix Montpellier Dishwasher F6 error myself?

Yes, check the water supply and restart the dishwasher to see if the issue resolves.

How much does it cost to fix F6 error?

Repair costs range from $30 to $120 for parts, plus technician labor depending on your region.

When should I call a technician for F6?

Call a technician if the error persists after basic checks or if internal components appear damaged.

Sources & References

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!