Mitsubishi Washing Machine Error E8
⚡ Quick Answer: The Mitsubishi Washing Machine error E8 indicates a malfunction in the water level sensor. This may lead to the machine not filling with water or disp... ✅ DIY Fixable
What Does Error E8 Mean?
The Mitsubishi Washing Machine error E8 indicates a malfunction in the water level sensor. This may lead to the machine not filling with water or displaying erratic water level readings. Common symptoms include the error code appearing on the display, and the washing machine may halt operation due to potential drainage or sensor issues. It's important to check the drain hose for kinks or blockages and inspect the drain pump filter if accessible to troubleshoot this issue.
Common Symptoms:
- Error E8 appears on display and washing machine may halt operation (pattern reported in community resources indicating drainage or sensor issues).
Possible Causes
- Water Level Sensor
- Wiring Issues
- Control Board Malfunction
How to Fix Error E8
DIY Fix Basic checks for drainage and sensors (community pattern)
- Power off and unplug the washing machine.
- Check the drain hose for kinks or blockages.
- Inspect and clean the drain pump filter if accessible.
- Verify that water is draining normally when a cycle runs.
- Restart the machine to see if error clears.
Technician Only Service diagnostic for drainage/sensor systems
- Perform a diagnostic test using the manufacturer service interface if available.
- Check drain pump operation and impeller movement.
- Test water level sensor and associated wiring for faults.
- Evaluate control board communication with sensors and pump.
Parts needed: Drain pump, Water level sensor, Control board wiring/connectors
- Error persists after basic drainage and reset attempts.
- Water remains undrained and mechanical noises occur.
- Unusual smells or electrical symptoms (burning, sparking).
Next step
Choose the next step for E8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E8 error mean on Mitsubishi Washing Machine?
E8 indicates a water level sensor malfunction, often causing filling issues.
Can I fix Mitsubishi Washing Machine E8 error myself?
Yes, you can check for drain hose blockages and clean the drain pump filter.
How much does it cost to fix E8 error?
Repair costs can range from ¥10,000 to ¥30,000+, depending on parts and service region.
When should I call a technician for E8?
Call a technician if the error persists after troubleshooting or if you notice unusual smells or noises.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!