Mitsubishi Washing Machine Error E2
⚡ Quick Answer: The Mitsubishi Washing Machine E2 error code signifies a drainage failure, where the machine is unable to empty water within the designated time. Symp... ✅ DIY Fixable
What Does Error E2 Mean?
The Mitsubishi Washing Machine E2 error code signifies a drainage failure, where the machine is unable to empty water within the designated time. Symptoms include the washer stopping mid-cycle, water remaining in the drum, and an ongoing drain cycle that does not complete. Common causes include blocked drainage paths or issues with the drain pump. Addressing these problems promptly can restore normal operation.
Common Symptoms:
- Washer stops mid‑cycle with E2 displayed
- Water remains in drum and does not drain
- Drain cycle does not complete
Possible Causes
- Drainage blockage (hose, pump filter, drain path) (medium)
- Faulty or obstructed drain pump impeller/motor (medium)
How to Fix Error E2
DIY Fix Check and clear drainage path
- Turn off and unplug the washing machine
- Inspect and clean the drain hose for blockages or kinks
- Locate and clean the pump filter (usually at the bottom front) to remove lint/debris
- Reconnect parts and restart to test drainage
Technician Only Inspect and service drain pump assembly
- Disconnect power and water supplies
- Remove access panel to reach drain pump
- Check impeller for obstruction and clear debris
- Test pump motor for proper function and continuity
- Replace pump assembly if impeller/motor is faulty
Parts needed: Drain pump, Pump filter, Drain hose
- If drainage components are inaccessible or fault persists after clearing blockages
- If drain pump shows electrical failure or noise during drain cycle
- If machine leaks or shows additional error patterns
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E2 error mean on Mitsubishi Washing Machine?
E2 error indicates a drainage failure, preventing the machine from emptying water properly.
Can I fix Mitsubishi Washing Machine E2 error myself?
Yes, you can check and clear the drainage path and clean the pump filter to resolve the issue.
How much does it cost to fix E2 error?
The estimated repair cost for the E2 error ranges from $80 to $250, depending on parts and labor.
When should I call a technician for E2?
Call a technician if the drainage components are inaccessible or if the error persists after clearing blockages.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!