Mitsubishi Washing Machine Error E12
⚡ Quick Answer: The Mitsubishi Washing Machine error code E12 indicates a failure in the drain pump, often resulting in unusual noises during operation and preventing... ✅ DIY Fixable
What Does Error E12 Mean?
The Mitsubishi Washing Machine error code E12 indicates a failure in the drain pump, often resulting in unusual noises during operation and preventing the machine from draining water. This issue may stem from a blockage in the drain hose or filter, or a malfunctioning pump. Users should inspect these components to identify and resolve the problem.
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Control Board Malfunction
How to Fix Error E12
DIY Fix Check basic water/drain conditions
- Ensure the washing machine is level and not visibly leaking.
- Inspect the drain hose and filter for obvious blockages or kinks.
- Confirm there is no significant water collected under the machine by carefully tipping it and checking for water in the base (if safe to do so).
Technician Only Service inspection for internal leaks or sensors
- Disconnect and secure the machine from power.
- Remove access panels to inspect the base for water accumulation.
- Check flood sensor components and internal hoses for leaks or damage.
- Test drain pump operation and continuity of relevant sensors.
- Replace faulty components as identified.
Parts needed: flood/anti‑flood sensor (if present), drain pump, internal hoses and seals
- If error persists after basic user checks
- If water is found inside the machine base
- If you are not comfortable performing the suggested steps
Next step
Choose the next step for E12
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
- Typical part-only price
- $15 - $40
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E12 error mean on Mitsubishi Washing Machine?
E12 error indicates a drain pump failure, often with unusual noises and failure to drain.
Can I fix Mitsubishi Washing Machine E12 error myself?
Yes, check for blockages in the drain hose and filter, and ensure the machine is level.
How much does it cost to fix E12 error?
Repair costs for E12 error can range from $100 to $300+, depending on parts and service rates.
When should I call a technician for E12?
Call a technician if the error persists after basic checks, or if you find water inside the machine base.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!