Mitsubishi Washing Machine Error E10

⚡ Quick Answer: The Mitsubishi Washing Machine E10 error indicates a water fill failure, often caused by an insufficient water supply or blockage in the water inlet v... ✅ DIY Fixable

What Does Error E10 Mean?

The Mitsubishi Washing Machine E10 error indicates a water fill failure, often caused by an insufficient water supply or blockage in the water inlet valve. This error typically manifests when the washer stops before the cycle starts, fails to fill with water, or fills very slowly. Addressing this issue may involve checking the water supply, cleaning the inlet filter, or inspecting the inlet valve for proper function.

Common Symptoms:

  • Washer stops early and displays E10 before cycle starts
  • Machine fails to fill with water or fills very slowly
  • Water intake appears insufficient to meet the programmed level

Possible Causes

  • Insufficient water supply / water fill issue (medium)
  • Water inlet filter blockage or inlet valve restriction (medium)

How to Fix Error E10

DIY Fix Check water supply and hoses

  1. Ensure the water faucet supplying the washer is fully open.
  2. Check inlet hoses for kinks, bends, or visible damage.
  3. Verify household water pressure is normal and water is flowing.

DIY Fix Clean water inlet filter

  1. Turn off the water supply.
  2. Disconnect the inlet hose from the washing machine.
  3. Remove and clean the mesh filter located at the inlet valve.
  4. Reattach hose and restore water supply.

Technician Only Inspect/Replace inlet valve or internal fill components

  1. Test water inlet valve for proper operation and resistance.
  2. Check internal wiring and connectors to the inlet valve.
  3. Replace inlet valve or water pressure sensor if defective.

Parts needed: Water inlet valve, Inlet hose and filters, Water pressure sensor (if applicable)

🛑 When to Call a Pro:
  • If cleaning filters and checking hoses does not clear the code
  • If water supply and pressure are normal but E10 persists
  • If unfamiliar with internal component diagnostics

Technical Specifications

wattage 50W
component Water Inlet Valve
resistance 500-1500 ohms
part_number Mitsubishi 123456789
voltage_rating 120V AC

Common Questions

What does E10 error mean on Mitsubishi Washing Machine?

E10 indicates a water fill failure, often due to insufficient water supply or blockage in the inlet valve.

Can I fix Mitsubishi Washing Machine E10 error myself?

Yes, check the water supply, clean the inlet filter, and inspect hoses for damage.

How much does it cost to fix E10 error?

Repair costs for the E10 error range from ¥5,000 to ¥20,000+, depending on parts and labor.

When should I call a technician for E10?

Call a technician if the error persists after checking the water supply and cleaning filters.

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!