Mitsubishi Air Conditioner Error P1

⚡ Quick Answer: The Mitsubishi Air Conditioner error code P1 indicates an abnormality with the intake temperature sensor, potentially leading to incorrect temperature... ✅ DIY Fixable

What Does Error P1 Mean?

The Mitsubishi Air Conditioner error code P1 indicates an abnormality with the intake temperature sensor, potentially leading to incorrect temperature regulation and erratic unit behavior. Users may notice the error displayed on the remote or unit panel, along with pooling water around the unit or unusual sounds during operation. This issue usually stems from a failure or abnormal reading of the intake temperature sensor, or a possible wiring issue at the sensor connection.

Common Symptoms:

  • Error code P1 displayed on remote or unit panel
  • Unit may display incorrect temperature feedback or behave erratically
  • Air conditioner may stop or not regulate temperature correctly

Possible Causes

  • Intake temperature sensor failure or abnormal reading (medium)
  • Connector or wiring issue at the intake sensor (medium)

How to Fix Error P1

DIY Fix Check basic conditions and reset

  1. Turn off the air conditioner using the remote and cut power at the breaker or unplug for at least 3 minutes then restore power.
  2. Check that indoor unit intake area and filters are clean and unobstructed (dust/debris can affect sensor readings).
  3. Ensure no recent voltage surge or power interruption occurred just before the error was shown.

Technician Only Inspect and test intake temperature sensor and wiring

  1. Disconnect power and open the unit’s access panel per service manual.
  2. Locate the intake temperature sensor (often a thermistor near the indoor unit air inlet).
  3. Use a multimeter to check sensor resistance at ambient temperature vs expected spec (consult model-specific service manual).
  4. Check wiring harness and connectors for corrosion, loose connections, or breaks.
  5. Replace faulty sensor or repair wiring as needed and verify correct operation.

Parts needed: Intake temperature sensor (thermistor), Wiring harness/connector repairs

🛑 When to Call a Pro:
  • If error persists after basic resets and cleaning
  • If you are not comfortable accessing internal sensors or wiring
  • If additional error codes appear concurrently

Technical Specifications

wattage N/A
component Drainage System
resistance N/A
part_number Mitsubishi 5D-0101-01
voltage_rating 230V AC

Common Questions

What does P1 error mean on Mitsubishi Air Conditioner?

P1 error indicates a problem with the intake temperature sensor, affecting temperature regulation and causing erratic behavior.

Can I fix Mitsubishi Air Conditioner P1 error myself?

Yes, you can attempt basic resets and cleaning of the intake area and filters to resolve the issue.

How much does it cost to fix P1 error?

Repair costs for the P1 error range from $50 to $200, depending on parts and labor in your region.

When should I call a technician for P1?

Call a technician if the error persists after resets, if you're uncomfortable accessing internal components, or if additional error codes appear.

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!