Mitsubishi Air Conditioner Error E3

⚡ Quick Answer: The Mitsubishi Air Conditioner E3 error indicates a communication failure between the indoor and outdoor units, often manifesting as an unresponsive r... ✅ DIY Fixable

What Does Error E3 Mean?

The Mitsubishi Air Conditioner E3 error indicates a communication failure between the indoor and outdoor units, often manifesting as an unresponsive remote control or blinking display lights. This issue may arise from a signal exchange fault, wiring issues, or problems with the remote control itself. Ensuring the remote has fresh batteries and confirming the indoor unit is powered can help, but persistent issues may require professional inspection.

Common Symptoms:

  • Error code E3 displayed on indoor unit or remote
  • Remote control inputs unresponsive or intermittent
  • Indoor unit fails to start or respond to remote commands

Possible Causes

  • Remote controller communication/transmission fault (medium)
  • Wiring or connection issues between remote and unit (medium)

How to Fix Error E3

DIY Fix Check remote and basic communication

  1. Ensure remote has fresh batteries and is functioning.
  2. Confirm the indoor unit is powered and the display shows an error.
  3. Try resetting the system by turning the unit off, waiting a minute, and restarting.

Technician Only Inspect and repair communication wiring

  1. Turn off all power to the air conditioner.
  2. Inspect the communication wiring between the remote interface and indoor unit for loose, damaged, or incorrect wiring.
  3. Verify correct cable specifications and secure connections.
  4. Test communication signals with diagnostic tools.
  5. Repair or replace defective wiring or remote interface components as needed.

Parts needed: Communication wiring harness, Remote control interface board

🛑 When to Call a Pro:
  • Persistent E3 error after basic reset and battery replacement.
  • Visible wiring damage or if you are uncomfortable working with electrical components.
  • Multiple units affected or intermittent communication errors.

Next step

Choose the next step for E3

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

Typical part-only price
$20 - $120
DIY difficulty
Medium
Estimated time
30-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Air Conditioner parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Air Conditioner Fin Cleaner

For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.

View maintenance supply
Maintenance supply

Model-Compatible Washable AC Filter

A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Control Board
resistance N/A
part_number Mitsubishi 9A80B1
voltage_rating 220V AC

Common Questions

What does E3 error mean on Mitsubishi Air Conditioner?

E3 error indicates a communication failure between the indoor and outdoor units.

Can I fix Mitsubishi Air Conditioner E3 error myself?

Yes, check remote batteries, ensure power, and reset the system.

How much does it cost to fix E3 error?

Repair costs for E3 error range from ¥5,000 to ¥25,000 depending on parts.

When should I call a technician for E3?

Call a technician if the error persists after resets or if there’s visible wiring damage.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!