Miele Refrigerator Error NA
⚡ Quick Answer: The Miele Refrigerator error code nA indicates a malfunction in the cooling system, typically due to a power interruption. This results in the freezer... ✅ DIY Fixable
What Does Error NA Mean?
The Miele Refrigerator error code nA indicates a malfunction in the cooling system, typically due to a power interruption. This results in the freezer temperature rising too high, which is displayed as 'nA' on the temperature display. Users may observe fluctuating temperature readings, showing both the highest recorded temperature and the current temperature. It's important to address this issue promptly to avoid spoilage.
Common Symptoms:
- nA displayed on temperature display of freezer zone after power interruption
- Temperature reading may change to show highest recorded then current freezer temperature
Possible Causes
- Power interruption causing temporary rise in freezer temperature (high)
How to Fix Error NA
DIY Fix Clear nA condition and assess temperature
- Press and hold the alarm/off button until nA is no longer illuminated.
- Observe the display to see the highest recorded freezer temperature.
- View the current freezer temperature display once it changes.
- Check the condition of food in the freezer to ensure it has not thawed and been refrozen.
Technician Only Verify restoration and system cooling
- Confirm that power supply to the refrigerator is stable and uninterrupted.
- Check freezer temperature sensors to ensure they are reading accurately post-power interruption.
- Verify that compressor and cooling system resume normal operation after reset.
- If temperatures do not return to normal or error persists, examine control board and temperature regulation components.
Parts needed: Temperature sensors, Control board (if faults present), Power supply components
- If temperatures in freezer do not return to set values after power restoration
- If nA persists after pressing alarm/off or if there are unusual noises or failure to cool
Next step
Choose the next step for NA
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 200W |
|---|---|
| component | Compressor |
| resistance | 5-10 ohms |
| part_number | Miele 10312300 |
| voltage_rating | 120V AC |
Common Questions
What does nA error mean on Miele Refrigerator?
The nA error indicates that the freezer temperature has risen too high, usually after a power interruption.
Can I fix Miele Refrigerator nA error myself?
Yes, you can clear the nA condition by pressing and holding the alarm/off button until it disappears.
How much does it cost to fix nA error?
Repair costs range from $100 to $400, depending on whether parts like sensors or control boards need replacement.
When should I call a technician for nA?
Call a technician if the freezer temperatures do not stabilize after power restoration or if unusual noises occur.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!