Miele Refrigerator Error F383
⚡ Quick Answer: The Miele Refrigerator error F383 indicates a water inlet system fault affecting the ice maker, leading to reduced ice production or complete stoppage... ✅ DIY Fixable
What Does Error F383 Mean?
The Miele Refrigerator error F383 indicates a water inlet system fault affecting the ice maker, leading to reduced ice production or complete stoppage. This can be caused by a kinked water inlet hose, a dirty inlet filter, or obstructions within the ice maker components. Users may also notice unusual humming sounds and rising internal temperatures.
Common Symptoms:
- Error F383 displayed on refrigerator screen
- Ice maker stops functioning or won’t fill with water
- Ice production interrupted
Possible Causes
- Kinked or blocked fresh water inlet hose (high)
- Dirty or obstructed water inlet filter (high)
- Incorrectly installed or blocked water container / reservoir (high)
- Jam or obstruction in the float switch inside water container (medium)
- Missing or faulty magnet for ice maker activation including water intake (medium)
- Software error requiring temperature setting adjustment (medium)
How to Fix Error F383
DIY Fix Basic checks and corrections for F383
- Check that the fresh water inlet hose to the ice maker is not kinked; straighten if needed.
- Clean the water inlet filter to ensure there’s no debris blocking water flow.
- Remove and clean the water container (if present) and ensure it’s correctly seated on its guide rails.
- Shake the water container to check if the float switch moves freely; clean the container if the float is stuck.
- Ensure the freezer temperature is set to -18°C and maintain this for at least 48 hours to clear any potential software-related conditions.
Technician Only Ice maker magnet and deeper ice maker system inspection
- Inspect the magnet located behind the holder on the left-hand handle when the ice maker drawer is in place; replace if missing or weak.
- Check the ice maker water inlet valve, wiring, and control signals for proper operation.
- Test float switch operation and replace if defective.
- Verify proper software operation and reset control board if needed.
- Confirm there are no internal blockages or sensor faults affecting water delivery.
Parts needed: Ice maker activation magnet, Float switch, Water inlet valve, Control board (if software reset fails)
- After user-level steps above have been completed and F383 persists.
- If the magnet for the ice maker is missing or cannot be verified without disassembly.
- If internal components (valve, float switch) are suspected faulty beyond basic cleaning.
- If the error returns after temperature-based reset period.
Next step
Choose the next step for F383
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Ice Maker Assembly
Automatically freezes and dispenses ice cubes inside the freezer compartment.
- Typical part-only price
- $75 - $160
- DIY difficulty
- Medium
- Estimated time
- 20-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 150W |
|---|---|
| component | Compressor |
| resistance | 5-10 ohms |
| part_number | Miele 1152180 |
| voltage_rating | 230V AC |
Common Questions
What does F383 error mean on Miele Refrigerator?
F383 indicates a water inlet fault for the ice maker, causing production issues.
Can I fix Miele Refrigerator F383 error myself?
Yes, check for kinks in the water inlet hose, clean the filter, and ensure the water container is correctly seated.
How much does it cost to fix F383 error?
Repair costs typically range from $100 to $350+ depending on parts and labor.
When should I call a technician for F383?
Call after trying user-level fixes if the error persists or if internal components are suspected faulty.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!