Miele Refrigerator Error F16

⚡ Quick Answer: The Miele refrigerator F16 error code indicates a fault with the door frame or mullion heater, which is responsible for preventing condensation and ic... ⚠️ Difficulty Varies

What Does Error F16 Mean?

The Miele refrigerator F16 error code indicates a fault with the door frame or mullion heater, which is responsible for preventing condensation and ice buildup around the door area. Symptoms typically include the display of the F16 code, ice formation around the door frame, and possible temperature warnings. Troubleshooting may involve checking for ice buildup and ensuring the door closes properly. If the error persists, further diagnosis of the heater circuit and components may be necessary.

Common Symptoms:

  • Refrigerator/freezer displays F16 error code on control panel
  • Ice forming around door frame or air duct areas
  • Possible warning/alarm related to frost or temperature irregularities

Possible Causes

  • Open or shorted door frame/mullion heater element (medium)
  • Broken wiring harness in door frame area (medium)
  • Faulty relay or control on main PCB not energizing heater (low)

How to Fix Error F16

DIY Fix Basic checks before service call

  1. Unplug the refrigerator from mains power and leave it off for a few minutes.
  2. Check the door alignment and ensure it closes fully without gaps.
  3. Inspect for obvious ice or condensation buildup around the door gasket area.

Technician Only Diagnose and repair heater circuit

  1. Disconnect power and remove freezer/refrigerator trim to access door frame/mullion heater wiring.
  2. Measure the heater element’s resistance to identify open or short conditions.
  3. Inspect and test wiring harness for breaks or pinched sections near hinges.
  4. If heater element is functional, test relay/drive circuitry on the main PCB for proper operation.
  5. Replace the failed heater element or wiring harness as required.

Parts needed: Door frame/mullion heater element, Wiring harness for heater circuit, Main control board/relay (if defective)

🛑 When to Call a Pro:
  • If error persists after basic checks and power cycling
  • If there is significant ice buildup with F16 displayed
  • If you are not comfortable performing voltage and resistance checks safely

Technical Specifications

wattage 150W
component Compressor
resistance 5-15 ohms
part_number Miele 10112345
voltage_rating 230V AC

Common Questions

What does F16 error mean on Miele refrigerator?

F16 indicates a fault with the door frame or mullion heater, leading to potential ice buildup and temperature warnings.

Can I fix Miele refrigerator F16 error myself?

Yes, you can perform basic checks such as inspecting the door seal and power cycling the unit.

How much does it cost to fix F16 error?

Estimated repair costs range from $100 to $350, depending on parts and labor.

When should I call a technician for F16?

Call a technician if the error persists after basic checks or if there is significant ice buildup.

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!