Miele Refrigerator Error F146

⚡ Quick Answer: The Miele Refrigerator F146 error indicates that the freezer compartment door has been left open for an extended period, leading to a door-open warnin... ✅ DIY Fixable

What Does Error F146 Mean?

The Miele Refrigerator F146 error indicates that the freezer compartment door has been left open for an extended period, leading to a door-open warning. This can cause compressor overheating, unusual noises, and a warm interior. To resolve the issue, ensure the freezer door is fully closed and monitor the display for the error to clear. If the error persists, further investigation may be required.

Common Symptoms:

  • Error code displayed on fridge panel typically accompanied by alarm or indicator that door is open
  • Freezer cooling may be affected due to prolonged door open

Possible Causes

  • Freezer door left open too long (high)

How to Fix Error F146

DIY Fix Close Freezer Door and Monitor

  1. Ensure the freezer compartment door is fully closed.
  2. Listen for proper seal click and check door gasket for obstructions.
  3. Observe display to see if F146 clears within a few minutes.

Technician Only Check Door Switch and Seal if Issue Persists

  1. Inspect the freezer door switch/sensor to ensure it properly detects closure.
  2. Check door gasket condition and alignment for air leaks.
  3. Test operation after door properly sealed to confirm error doesn’t reoccur.

Parts needed: Door switch/sensor, Door gasket/seal

🛑 When to Call a Pro:
  • If F146 persists after the door is confirmed closed and the seal and switch check does not resolve the issue

Technical Specifications

wattage 150W
component Compressor
resistance 5-10 ohms
part_number Miele 611, 611, 611
voltage_rating 230V AC

Common Questions

What does F146 error mean on Miele Refrigerator?

The F146 error indicates that the freezer door has been left open too long, causing a warning and potential overheating.

Can I fix Miele Refrigerator F146 error myself?

Yes, simply close the freezer door fully and monitor the display to see if the error clears.

How much does it cost to fix F146 error?

Estimated repair costs for the F146 error range from $50 to $200, depending on parts and labor.

When should I call a technician for F146?

If the F146 error persists after confirming the door is closed and checking the seal and switch.

Sources & References

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!