Miele Refrigerator Error F143
⚡ Quick Answer: The Miele Refrigerator error F143 indicates that the fridge compartment door has been left open for too long, causing the refrigerator to detect errat... ✅ DIY Fixable
What Does Error F143 Mean?
The Miele Refrigerator error F143 indicates that the fridge compartment door has been left open for too long, causing the refrigerator to detect erratic temperature readings. This typically occurs after approximately 45 minutes and may trigger an interior alarm. Once the door is closed, cooling performance should return to normal, but if the error persists, further investigation of the door switch and seal may be needed.
Common Symptoms:
- Error code F143 displayed on control panel
- Interior alarm or alert may sound
- Cooling performance unaffected once door is closed
Possible Causes
- Fridge compartment door left open too long (high)
How to Fix Error F143
DIY Fix Close the refrigerator door
- Ensure the fridge compartment door is fully closed and latched.
- Check that no items are obstructing the door seal.
- Wait a few minutes to see if the error clears automatically.
Technician Only Verify door switch and seal if error persists
- Inspect the door switch mechanism for proper operation.
- Check the door gasket/seal for wear or damage.
- Test door-ajar sensor continuity with a multimeter.
- Replace faulty door switch or gasket if necessary.
Parts needed: door switch, door gasket/seal
- If the error persists after ensuring the door is closed and verifying switches/seals, contact Miele service.
Next step
Choose the next step for F143
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Gasket
Creates a watertight seal around the door to prevent leaks during operation.
- Typical part-only price
- $45 - $110
- DIY difficulty
- Medium
- Estimated time
- 30-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 10k ohms at 25°C |
| part_number | Miele 10220010 |
| voltage_rating | 120V AC |
Common Questions
What does F143 error mean on Miele Refrigerator?
F143 indicates the fridge door has been open too long, affecting temperature readings.
Can I fix Miele Refrigerator F143 error myself?
Yes, simply ensure the door is fully closed and check for any obstructions.
How much does it cost to fix F143 error?
Estimated repair costs range from $50 to $200 depending on the issue.
When should I call a technician for F143?
If the error persists after closing the door and checking seals, contact Miele service.
Sources & References
- Miele Cooling & Freezing Fault F143 (Hong Kong) (official)
- Miele Fehler F143 (Germany) (official)
- Miele Anomalie F143 (France) (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!