Maytag Refrigerator Error F

⚡ Quick Answer: The Maytag Refrigerator error code 'F' signifies a general internal fault, potentially a software glitch or compressor failure. You may notice the let... ✅ DIY Fixable

What Does Error F Mean?

The Maytag Refrigerator error code 'F' signifies a general internal fault, potentially a software glitch or compressor failure. You may notice the letter 'F' flashing on the display, and the refrigerator could exhibit unusual humming sounds with a warm interior. This error may halt normal operation until the unit is reset.

Common Symptoms:

  • Letter "F" flashing on the refrigerator’s display panel
  • Appliance may stop normal operation until reset

Possible Causes

  • General internal fault or software glitch (medium)

How to Fix Error F

DIY Fix Reset Refrigerator Power

  1. Turn off the power to the refrigerator by unplugging it or switching off the circuit breaker.
  2. Leave the unit without power for approximately 1 minute.
  3. Restore power by plugging the unit back in or switching the circuit breaker back on.
  4. Ensure cooling function is turned on.
  5. Monitor for one minute to see if the "F" code reappears.

Technician Only Professional Diagnosis and Repair

  1. If the "F" code persists after a proper reset, schedule service with a certified Maytag/Whirlpool technician.
  2. Technician should check diagnostic mode and control board logs to isolate the fault.
  3. Inspect relevant sensors, wiring harnesses, and the main control board for faults correlated to the displayed code.

Parts needed: Diagnostic tools, Potential control board and sensors (as identified by technician)

🛑 When to Call a Pro:
  • If the "F" code persists after resetting power as outlined
  • If normal cooling or refrigerator operation does not resume
  • If unusual noises or additional error codes appear

Next step

Choose the next step for F

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 200W
component Compressor
resistance 3-5 ohms
part_number W10662129
voltage_rating 120V AC

Common Questions

What does F error mean on Maytag Refrigerator?

The F error indicates a general internal fault, possibly a software glitch or compressor failure.

Can I fix Maytag Refrigerator F error myself?

Yes, you can try resetting the refrigerator by unplugging it for a minute and then restoring power.

How much does it cost to fix F error?

Repair costs can range from $150 to over $500, depending on the diagnosis and parts needed.

When should I call a technician for F?

Call a technician if the F code persists after resetting, if cooling does not resume, or if you hear unusual noises.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!