Maytag Refrigerator Error 10

⚡ Quick Answer: The Maytag refrigerator error 10 indicates a malfunction in the temperature sensor, leading to inconsistent temperature readings and improper cooling.... ✅ DIY Fixable

What Does Error 10 Mean?

The Maytag refrigerator error 10 indicates a malfunction in the temperature sensor, leading to inconsistent temperature readings and improper cooling. This error may stem from a logic or sensor processing issue within the main control board. Common symptoms include the display showing the E10 code and the refrigerator failing to cool effectively, potentially affecting the fans or compressor operation.

Common Symptoms:

  • Display shows E10 code and refrigerator not cooling properly
  • Fans or compressor may not run as expected

Possible Causes

  • Main control board logic or sensor processing error (medium)

How to Fix Error 10

DIY Fix Power reset refrigerator

  1. Unplug refrigerator from power outlet
  2. Wait about 10 minutes
  3. Plug refrigerator back in and observe if error clears

Technician Only Inspect and possibly replace main control board

  1. Disconnect power
  2. Remove rear control cover
  3. Visually inspect main control board for burnt components or corrosion
  4. Test sensors and control board functionality
  5. Replace main control board if faulty

Parts needed: Main control board, Control board harness connectors

🛑 When to Call a Pro:
  • If error persists after power reset
  • If there are burnt components, corrosion, or no cooling operations
  • If unsure about safely accessing internal electronics

Next step

Choose the next step for 10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does 10 error mean on Maytag refrigerator?

Error 10 indicates a temperature sensor malfunction, leading to improper cooling and inconsistent readings.

Can I fix Maytag refrigerator 10 error myself?

Yes, you can perform a power reset by unplugging the refrigerator for 10 minutes and plugging it back in.

How much does it cost to fix 10 error?

$150–$400 depending on parts and labor, which can vary by region.

When should I call a technician for 10?

Call a technician if the error persists after a reset, or if you notice burnt components or no cooling.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!