Marshall Refrigerator Error TEMPERATURE-ALARM

⚡ Quick Answer: The Marshall refrigerator TEMPERATURE-ALARM error indicates that the internal temperature has exceeded the safe range, often resulting in unusual comp... ✅ DIY Fixable

What Does Error TEMPERATURE-ALARM Mean?

The Marshall refrigerator TEMPERATURE-ALARM error indicates that the internal temperature has exceeded the safe range, often resulting in unusual compressor sounds and an inconsistent temperature display. This alarm is triggered when the temperature rises above the set point, potentially leading to food spoilage. It's essential to check door seals, avoid frequent openings, and monitor the internal temperature closely.

Common Symptoms:

  • Alarm sounds or warning appears when internal temperature rises above desired setpoint
  • Refrigerator is not maintaining cool temperatures
  • Food may be warmer than expected

Possible Causes

  • Temperature Sensor
  • Compressor Relay
  • Dirty Condenser Coils

How to Fix Error TEMPERATURE-ALARM

DIY Fix Check interior temperature and door/usage factors

  1. Confirm internal temperature is above your set temperature (e.g., fridge warmer than expected).
  2. Make sure doors are fully closed and seals are intact.
  3. Reduce frequent door opening and avoid adding large amounts of warm items at once.
  4. Check that vents inside the fridge aren’t blocked by food, allowing air circulation.

DIY Fix Perform basic power reset

  1. Unplug refrigerator from power outlet.
  2. Wait at least 5 minutes (to allow control board to reset).
  3. Plug back in and observe if alarm clears.

Technician Only Check temperature sensors and cooling system

  1. Measure interior temperature with an independent thermometer to confirm alarm validity.
  2. Inspect and test the temperature sensor (thermistor) and its wiring for faults.
  3. Check the evaporator fan and condenser fan operation for proper airflow.
  4. Evaluate compressor operation and refrigerant system for cooling performance.

Parts needed: Temperature sensor (thermistor), Evaporator fan, Condenser fan, Compressor and refrigerant system

🛑 When to Call a Pro:
  • If the alarm persists after basic checks and reset
  • If internal temperature continues to rise despite proper operation
  • If strange noises, ice buildup, or smells accompany the alarm

Technical Specifications

wattage 150W
component Temperature Sensor
resistance 5-10 kΩ
part_number Marshall TS-1234
voltage_rating 120V AC

Common Questions

What does TEMPERATURE-ALARM error mean on marshall refrigerator?

It indicates that the internal temperature is above the safe range, triggering an alarm.

Can I fix marshall refrigerator TEMPERATURE-ALARM error myself?

Yes, check the temperature, ensure doors are sealed, and perform a power reset.

How much does it cost to fix TEMPERATURE-ALARM error?

Estimated repair costs range from ¥10,000 to ¥50,000+ depending on parts and labor.

When should I call a technician for TEMPERATURE-ALARM?

Call if the alarm persists after checks, if temperatures rise, or if you hear strange noises.

Sources & References

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!