Marshall Refrigerator Error POWER-LOSS
⚡ Quick Answer: The POWER-LOSS error on your Marshall refrigerator indicates that the unit has detected a disruption in its power supply, often following a power outa... ✅ DIY Fixable
What Does Error POWER-LOSS Mean?
The POWER-LOSS error on your Marshall refrigerator indicates that the unit has detected a disruption in its power supply, often following a power outage. This can prevent the refrigerator from cooling effectively until it is reset or power is stabilized. No additional fault codes are typically associated with this error, making it crucial to address the power supply issue promptly.
Common Symptoms:
- Refrigerator display shows POWER-LOSS after a power outage or interruption
- Unit may not restart normal cooling operations until reset or power stabilized
- No other specific fault codes accompany POWER-LOSS
Possible Causes
- Power interruption detection (medium)
How to Fix Error POWER-LOSS
DIY Fix Check power supply and reset refrigerator
- Ensure refrigerator is fully plugged into a properly grounded outlet
- Check that circuit breakers have not tripped and power is stable
- Unplug refrigerator power cord for 5–10 minutes then plug back in to allow reset
- Observe display to see if the POWER-LOSS indication clears after power reset
Technician Only Evaluate control board and power handling if issue persists
- Verify stable incoming power voltage and check for signs of surge damage
- Inspect control board and power module for damage after repeated power loss events
- Use multimeter to test outlet and internal power circuits
- Replace control board or surge protection parts if confirmed failed
Parts needed: Multimeter, Surge protection device, Control board
- If POWER-LOSS persists after power reset attempts
- If the unit fails to resume cooling or shows additional error codes
- If there are signs of electrical damage (smoke, burning smell)
Next step
Choose the next step for POWER-LOSS
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 150W |
|---|---|
| component | Power Supply Board |
| resistance | 5-10 ohms |
| part_number | Marshall PSB-1234 |
| voltage_rating | 120V AC |
Common Questions
What does POWER-LOSS error mean on marshall refrigerator?
It indicates a power interruption detected by the refrigerator, affecting its cooling operations.
Can I fix marshall refrigerator POWER-LOSS error myself?
Yes, check the power supply, reset the unit by unplugging it for 5–10 minutes, and ensure the outlet is functioning.
How much does it cost to fix POWER-LOSS error?
Estimated repair costs range from $80 to $300, depending on the issue's severity.
When should I call a technician for POWER-LOSS?
Call a technician if the error persists after resetting, if cooling does not resume, or if you notice signs of electrical damage.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!