Magic Chef Refrigerator Error E1

⚡ Quick Answer: The Magic Chef Refrigerator E1 error indicates a failure in the temperature sensor circuit, leading to incorrect or fluctuating temperature readings i... ✅ DIY Fixable

What Does Error E1 Mean?

The Magic Chef Refrigerator E1 error indicates a failure in the temperature sensor circuit, leading to incorrect or fluctuating temperature readings in the fresh food compartment. This often results in reduced cooling performance and can affect food preservation. To resolve this, inspect the thermistor and its wiring for damage, or consider replacing the sensor if necessary.

Common Symptoms:

  • Display shows E1
  • Fresh food compartment temperature incorrect or fluctuating
  • Possible reduced cooling performance in refrigerator compartment

Possible Causes

  • Refrigerator compartment thermistor failure (medium)
  • Damaged or disconnected thermistor wiring or connector (medium)

How to Fix Error E1

DIY Fix Basic user checks and reset

  1. Ensure the refrigerator door seals properly and the unit is level.
  2. Try power cycling the refrigerator by unplugging it for a few minutes and then plugging it back in to clear transient errors.
  3. Observe if the E1 clears after a few hours of normal operation and temperatures stabilize.

Technician Only Inspect and replace refrigerator thermistor

  1. Disconnect power to the refrigerator.
  2. Access the refrigerator compartment interior panel to locate the thermistor sensor on the rear wall.
  3. Inspect the thermistor and its wiring for visible damage, corrosion, or loose connections.
  4. Using a multimeter, test the thermistor resistance at room temperature; if open or shorted, replace the thermistor.
  5. Reassemble and restore power; verify the E1 error code is cleared and temperature control functions normally.

Parts needed: Refrigerator compartment thermistor sensor, Associated wiring harness and connector

🛑 When to Call a Pro:
  • If the thermistor and wiring test normal but E1 persists, indicating possible control board or deeper electronics issue.
  • If the user is uncomfortable accessing internal components or performing electrical tests.

Next step

Choose the next step for E1

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-15 kOhms
part_number MC-TS-001
voltage_rating 120V AC

Common Questions

What does E1 error mean on Magic Chef Refrigerator?

E1 error indicates a temperature sensor failure, causing incorrect temperature readings in the fresh food section.

Can I fix Magic Chef Refrigerator E1 error myself?

Yes, you can check door seals, power cycle the unit, and monitor temperatures for stabilization.

How much does it cost to fix E1 error?

Repair costs range from $15–$60 for the thermistor sensor, plus labor if needed.

When should I call a technician for E1?

Call a technician if E1 persists after checking the thermistor and wiring, or if you're uncomfortable with repairs.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!