Magic Chef Refrigerator Error E6

⚡ Quick Answer: The Magic Chef Refrigerator E6 error code indicates a compressor start circuit or inverter issue, leading to a failure in the compressor to start or e... ⚠️ Difficulty Varies

What Does Error E6 Mean?

The Magic Chef Refrigerator E6 error code indicates a compressor start circuit or inverter issue, leading to a failure in the compressor to start or erratic cycling. This results in inconsistent temperature readings, which can affect food preservation.

Common Symptoms:

  • E6 displayed on fridge panel
  • Compressor fails to start
  • Compressor cycles erratically or does not run

Possible Causes

  • Compressor start circuit / inverter fault (medium)

How to Fix Error E6

DIY Fix Basic checks and power cycle

  1. Unplug the refrigerator for 5–10 minutes to reset controls.
  2. Ensure the unit is properly plugged in and outlet is working.
  3. Check for any obvious signs of damage or burnt smells at back of the unit.

Technician Only Diagnose and repair compressor start circuit

  1. Disconnect power and access the compressor compartment.
  2. Inspect the compressor start relay and run capacitor for burn marks or loose connections.
  3. Replace defective relay or capacitor with correct model.
  4. Verify wiring connections between control board and compressor start components.
  5. Test compressor start operation after reassembly.

Parts needed: Compressor start relay, Run capacitor, Wiring harness

🛑 When to Call a Pro:
  • If compressor still does not start after replacing start circuit components
  • If there are signs of sealed system failure (locked compressor)
  • If you are not comfortable accessing high voltage components

Next step

Choose the next step for E6

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-10 kΩ
part_number MC-TEMP-SENSOR-001
voltage_rating 120V AC

Common Questions

What does E6 error mean on Magic Chef Refrigerator?

E6 error indicates a failure in the compressor start circuit or inverter, causing the compressor to fail to start or cycle erratically.

Can I fix Magic Chef Refrigerator E6 error myself?

Yes, basic checks like power cycling the unit or checking for damage can help. Unplug the fridge for 5-10 minutes to reset it.

How much does it cost to fix E6 error?

Repair costs for the E6 error range from $50–$200 for parts, excluding labor.

When should I call a technician for E6?

Call a technician if the compressor does not start after replacing components, if there's a sealed system failure, or if you're uncomfortable with high voltage.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!