Liebherr Dishwasher Error E10

⚡ Quick Answer: The Liebherr dishwasher error E10 indicates a potential issue with the water inlet valve, leading to the dishwasher's failure to fill with water. If t... ✅ DIY Fixable

What Does Error E10 Mean?

The Liebherr dishwasher error E10 indicates a potential issue with the water inlet valve, leading to the dishwasher's failure to fill with water. If this error occurs, it's essential to check for any obstructions or damage to the water inlet valve and ensure the water supply is active. If the problem persists, further investigation or professional assistance may be required.

Possible Causes

  • Water inlet valve failure
  • Blocked water supply line
  • Faulty float switch

How to Fix Error E10

DIY Fix Gather model‑specific information and consult Liebherr support

  1. Record the full model number and serial number of your Liebherr dishwasher (typically on a label inside the door frame).
  2. Visit Liebherr’s official service or manual download portal to search for your exact model’s documentation. %E5%86%B0%E7%AE%B1-%E5%86%B7%E6%9F%9C/%E5%AE%A2%E6%88%B7%E6%9C%8D%E5%8A%A1-3119301?utm_source=chatgpt.com))
  3. Contact Liebherr customer service with the model and E10 code, and request an official explanation for the error. [Liebherr](%E5%86%B0%E7%AE%B1-%E5%86%B7%E6%9F%9C/%E5%AE%A2%E6%88%B7%E6%9C%8D%E5%8A%A1-3119301?utm_source=chatgpt.com))
🛑 When to Call a Pro:
  • If water is leaking from the machine or visible water is present around or under the dishwasher.
  • If the E10 code persists despite basic checks (e.g., reset, power cycle) and you cannot find model‑specific documentation.

Next step

Choose the next step for E10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Float Switch

Detects the maximum water level to prevent overflow and potential flooding.

$15 - $40 · Easy · 10-20 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Water Inlet Valve
resistance 20-30 ohms
part_number Liebherr 7442130
voltage_rating 230V AC

Common Questions

What does E10 error mean on Liebherr dishwasher?

E10 error on Liebherr dishwasher signifies a problem with the water inlet valve, preventing the dishwasher from filling with water.

Can I fix Liebherr dishwasher E10 error myself?

Yes, you can check the water inlet valve for obstructions and ensure the supply is active. Consult the model-specific documentation for guidance.

How much does it cost to fix E10 error?

Repair costs for the E10 error can vary based on model and region; it's best to consult local service providers for estimates.

When should I call a technician for E10?

Call a technician if there is visible water leakage or if the E10 code remains after basic troubleshooting steps.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!